Camera Mounts and Assorted 3D Printed Parts

[WheresWaldo]

Pioneer Power Meter Battery Cover Shortened link (may not work 100% of the time)
Pioneer Power Meter Battery Cover Full URL

I have been told these are nearly impossible to find, even used.

[garage0racing]

And, here is my first RCT715 Seat Post Mount Adapter, http://shpws.me/TcYx
It is specifically for the Pinarello Dogma F and provides a secure mount that is not the bulky rubber spacers and O-rings that Garmin provides in the box.

Can you do a similar race number holder for the Dogma F (non #)?




Sent from my iPhone using Tapatalk

[WheresWaldo]

Can you do a similar race number holder for the Dogma F (non #)?

Sent from my iPhone using Tapatalk

I haven't forgotten, just been busy.

Here is a mount for SWAT saddles and the Giant TL100-200 tail lights. http://shpws.me/Tg4C (long URL - https://www.shapeways.com/product/Q9L68 ... l200-mount)
Do not choose the material "PA12 Glass Beads" it is stronger but more brittle so not ideal for the vibration that we experience cycling.

[BdaGhisallo]

Waldo,

Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.

https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB

[WheresWaldo]

Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB

If someone would give me the diameter measurement of the body, I would.

[BdaGhisallo]

Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB

If someone would give me the diameter measurement of the body, I would.

As soon as I get mine I will do that, unless someone beats me to it.

[BdaGhisallo]

Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB

If someone would give me the diameter measurement of the body, I would.

The product page lists the diameter as 22mm. I'll check mine when I get it.

[WheresWaldo]

Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB

If someone would give me the diameter measurement of the body, I would.

The product page lists the diameter as 22mm. I'll check mine when I get it.

Yeah, but I don't know where they measured it and if it includes those little ears.

[WheresWaldo]

Sent out by Shapeways yesterday; Customers who spend $125 at my shop, will receive free shipping (including international), throughout the promotional period. You can enter MADBIKEFREESHIP at checkout for free shipping from now until December 31st. Terms and conditions apply*.
Shapeways also has a Holiday Shopping Guide. We are one of the storefronts featured in the guide.
https://www.shapeways.com/shops/revolutionaries Use code MADBIKEFREESHIP

*This free standard shipping promotion is valid through midnight ET on December 31, 2022. This offer includes a coupon code for unlimited uses within the promotional period. The coupon code cannot be combined with any other offer. The coupon code is void if altered, copied, transferred, auctioned, or sold. This offer is valid for items within your specific shop and not valid on prior purchases. This promotion is subject to change without notice.
https://www.shapeways.com/shops/revolutionaries

[WheresWaldo]

I am on a forced break from designing anything until next week, have to replace a dead PC. Of course it had all my stuff I was working on installed. Good thing Fusion 360 is cloud based, so no design files are lost.

[BdaGhisallo]

If someone would give me the diameter measurement of the body, I would.

The product page lists the diameter as 22mm. I'll check mine when I get it.

Yeah, but I don't know where they measured it and if it includes those little ears.

I got mine and I think I'll hold off on offering any measurements. It's not the same shaping as the TraceR and there's a bit of a taper going on.

[WheresWaldo]

The product page lists the diameter as 22mm. I'll check mine when I get it.

Yeah, but I don't know where they measured it and if it includes those little ears.

I got mine and I think I'll hold off on offering any measurements. It's not the same shaping as the TraceR and there's a bit of a taper going on.

No problem, plus I won't be back up and running until Monday or Tuesday.

[WheresWaldo]

Here is a mount for the Giant TL200. I don't see much Giant accessories here on the Eastern half of the US, but they appear very popular in the Asian and Australian markets. http://shpws.me/Tg4C

[Curious George]

Hi Waldo,
Do you have a 27.2mm mount for the Varia 715?
I looked through the store on shapeways and couldn't find one.

Thx in advance

[WheresWaldo]

Hi Waldo,
Do you have a 27.2mm mount for the Varia 715?
I looked through the store on shapeways and couldn't find one.

Thx in advance

https://www.shapeways.com/product/DEFT2 ... nt-adapter
http://shpws.me/TkH4

Sorry this was sitting in my models for over a month and I totally forgot about it.