2020 Aethos Sub UCI weight Specialized.

[Cpritch20]

Boom, done.

WOW! That's amazing, both looks and weight.

[LedZeppelin007]

Aethos 10R size 58, Tropical Teal





Sent from my iPhone using Tapatalk Pro

[Turrifik]

Finally finished this build. 5.95kg ready to climb w/ 50/34t praxis rings and 11/32t red cassette at the rear.




Sent from my iPhone using Tapatalk

[Gary71]

Finally finished this build. 5.95kg ready to climb w/ 50/34t praxis rings and 11/32t red cassette at the rear.




Sent from my iPhone using Tapatalk

Dam!
Nothing left to blame except the legs.
Clean build
Chapeau

[Turrifik]

Indeed! I now have one less excuse for not breaking last year’s climbing PR’s. No pressure.

Took it out for a first ride today. Felt obliged to stop and take a picture at this billboard.



Sent from my iPhone using Tapatalk

[Beancouter]

And another to add to the pack:

- 56 Jet Fuel s-works
- Ultegra R8170 groupset
- Dura Ace 11/30 cassette
- Red dub crank, extralite chainrings
- Feder 35mm + rd230 hubs
- 32mm Reneherse tyres (Aerothan tubes)
- Roval Rapide bars
- Kalloy Uno stem
- cccache mount
- speedplay zero (ti spindles and bow ties)
- Darimo T1 seatpost
- Galfer discs / pads

Weight 5997g - will drop another 50 or so with Ridewell tubes and fork cut. I have also got the Alpinist cockpit which is another 100g saving but find the Rapide more comfortable.

The groupset looks great with the frame - personally I think a traditional spider/rings works well on the Aethos (takes a lot of weight visually from the BB area).

Assuming the spider works out ok (AliExpress!), crank will have a 4iiii power meter added for 10g, which makes the tota crankset pretty much 510g with power.














Sent from my iPhone using Tapatalk we

[maquisard]

Love the tan walls, not normally a fan of this on non-gravel bikes but it works very well against the all back finishing kit.

Great build and weight!

[mathias720]

Finally finished this build. 5.95kg ready to climb w/ 50/34t praxis rings and 11/32t red cassette at the rear.

How is the shifting of the praxis 34/50 with the axs FD, i am thinking of going same chainrings for my quarq powermeter for factor ostro vam build

[BigBoyND]

Those are shimano derailleurs

[matheussiq8]

Hi matheussiq8,

could you perhaps post more pictures of the frame in daylight? Is the gloss clay actually grey or a little pinkish? Thanks

Finally got all the components build my Aethos! Got the S-Works frame in size 58 from The Flow in Italy for 3500 thanks to this thread!

The weight though came a little higher than what I expected. Is that because of the Gloss Clay / Silver colorway?

Sorry for the late answer! I did a dream build video of the bike where you can check the color under very different light situations:

https://www.youtube.com/watch?v=LtD2wGvLb0E&t=1s

[Vincentsmoox]

The bike comes with a proprietary adapter plate for the front fork. Spacing is for a 160mm disc. For the rear, the caliper mounts directly to the chainstay. Spacing is for a 140mm disc. I think you could use a standard Shimano/SRAM adapter plate for the rear if you want 160mm on both ends.

My LB just use SRAM red front caliper adapter, not the aethos proprietary one. I dont Find any problem until now, is it dangerous?


Sent from my iPhone using Tapatalk

[Kaludrob]

Looks beautiful... Thanks a lot.

Hi matheussiq8,

could you perhaps post more pictures of the frame in daylight? Is the gloss clay actually grey or a little pinkish? Thanks

Finally got all the components build my Aethos! Got the S-Works frame in size 58 from The Flow in Italy for 3500 thanks to this thread!

The weight though came a little higher than what I expected. Is that because of the Gloss Clay / Silver colorway?

Sorry for the late answer! I did a dream build video of the bike where you can check the color under very different light situations:

https://www.youtube.com/watch?v=LtD2wGvLb0E&t=1s

[Vincentsmoox]

Hi

What wheelset you guys use oN aethos?
For all rounder mixing flat and hilly area
Sometimes strong wind


Sent from my iPhone using Tapatalk

[Klaster_1]

What wheelset you guys use oN aethos?
For all rounder mixing flat and hilly area
Sometimes strong wind

Light-Bicycle AR45 Flyweight rims (45mm deep, 28mm wide), Extralite Cyberhubs SPD-2, Pillar X-TRA Lite Ti; 1100g overall. You can feel strong wind gusts, but it's manageable. Can't compare to other rims.

[FlatlandClimber]

Extralite Cyberdisc 339 - Extralite Hubs with XD-15 Ceramic intervals, Sapim XRay spokes. 1095g, 21c internal hookless. Really lovely and good in the wind too.