Camera Mounts and Assorted 3D Printed Parts

[xterrastrial]

Thx!

[orange77]

Hi,

Can't you make an "aero" version for a Edge 520? (Similar to the Bolt (I've searched and didn't find)).

Thanks

[WheresWaldo]

@orange77 I am not sure because of the shape of the bottom of Garmins devices I am not sure how to integrate that option.

[xterrastrial]

Sure, give me 24 hours

I have digital vernier calipers. Let me know if I can help by measuring anything on my BMC mounts. Thx.


Sent from my iPhone using Tapatalk

[PaulH]

Do you have a blendr high go pro mount , I can only see the low?


Sent from my iPhone using Tapatalk

[xterrastrial]

Do you have a blendr high go pro mount , I can only see the low?

Select the "Small" instead of "Medium" option on Shapeways.

Sent from my iPhone using Tapatalk

[WheresWaldo]

Hey Paul, something like this?

[xterrastrial]

Hey Paul, something like this?

Yes!

[WheresWaldo]

Before I upload it want to make sure the BMC uses the GoPro standard. Secondly does BMC have a name for their mount ie Bontrager Blendr, Fizik I.C.S., Topeak Quikclip, etc.?

[xterrastrial]

Before I upload it want to make sure the BMC uses the GoPro standard. Secondly does BMC have a name for their mount ie Bontrager Blendr, Fizik I.C.S., Topeak Quikclip, etc.?

Re: the GoPro std, the "double" mount in the press pic I had posted has the same interface for the top and bottom attachments, and they show/advertise the bottom being for GoPro's, so I have to assume they both are.

The system is BMC's ICStem integrated mount.
http://www.bmc-switzerland.com/int-en/i ... it-system/

Finally, here are some pics of my current ICStem integrated mount with calipers if that helps at all.




Sent from my iPhone using Tapatalk

[orange77]

@orange77 I am not sure because of the shape of the bottom of Garmins devices I am not sure how to integrate that option.

Hi Waldo,

Ok, thanks

[WheresWaldo]

Paul,

It's done and up on the same page as the rest of the BOLT Aero mounts, so you go and choose accordingly, BOLT Mounts

Extra Small = BMC ICStem Mount (This should also fit the upper Bontrager Blendr mount)
Small = Bontrager Blendr High Mount (This approximates the overall dimensions of the OEM Garmin High Mount)
Medium = Bontrager Blendr Low Mount (This approximates the overall dimensions of the OEM Garmin Low Mount)

[xterrastrial]

Paul,

It's done and up on the same page as the rest of the BOLT Aero mounts, so you go and choose accordingly, BOLT Mounts

Extra Small = BMC ICStem Mount (This should also fit the upper Bontrager Blendr mount)
Small = Bontrager Blendr High Mount (This approximates the overall dimensions of the OEM Garmin High Mount)
Medium = Bontrager Blendr Low Mount (This approximates the overall dimensions of the OEM Garmin Low Mount)

Ordered! Thx!


Sent from my iPhone using Tapatalk

[WheresWaldo]

Uses a couple of zip ties to hold it in place. When the fellow cyclist that asked for this sent me a picture of it installed, I was surprised to see it mounted in front of the saddle clamp instead of behind the saddle clamp.

[WheresWaldo]

Just got these images from someone who wanted a mount for their SWAT equipped saddle




For us weight weenies the mount without the screws weighed in at 6 grams.