Purchased in 2017. There are some condition issues, but the crankset has functioned perfectly for the past 6-7 years.
1. On the spindle there's an area of wear (see pics) I didn't have the proper spacing and the plastic insert wasn't seated properly. When spaced correctly it is covered by the the spacer completely and there have been no issues, no wear since.
2. About the time I was struggling with the spacing (yay bb86 format for a 30mm spindle), the front derailleur adjustment screws were hitting the crank arm. I put black nail polish over that area (you can see it in the pics).
These were all issues I had around 2020-21 and once I went to a bbinfinite BB for that bike, the spacing problems were resolved and no issues since.
3. There are some nicks and scratches on the drive side, these have been well ridden.
$750 shipped in US, buyer covers any transaction fees.
I also have an old THM PF30 bottom bracket shell that needs to be cleaned and needs bearings (6806) I can include. I do not have a spare thm tool for the bb, as I still have my clavicula classic mounted on another bike.
