150mm cranks that use SRAM's 8-bolt mount, with an extended chainline for large tires?

The spirit of Grav-lo-cross. No but seriously, cyclocross and gravel go here!

Moderator: Moderator Team

Post Reply
WattGodTheBased
Posts: 4
Joined: Sat Mar 19, 2022 12:21 am

by WattGodTheBased

Hey so I am in a weird position. My 3T RaceMax has a 44T SRAM X-Sync chainring on it from SRAM. In order to do that, I must run SRAM's wide AXS cranks otherwise the chainring will hit the chainstay. I also have a Quarq that I'd like to keep, so this further hurts my options. SRAM's wide crankset has a 47.5mm chainline. I'm now trying to feel out what my options are here and was wondering if anyone had any leads on this.

I could:

-Downsize to a 42T and use a JCOB, Croder, or Driveline crankset
-Discover a 107 BCD chainring that has an offset chainline
-Sell everything and drop $1300 for a Rotor crankset and spider (the PM sucks)

Alugear says their chainrings are offset 3mm, but I am unsure if SRAM's own rings are also offset.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply