Building WW Full-internally cable routed SuperX MY2017

The spirit of Grav-lo-cross. No but seriously, cyclocross and gravel go here!

Moderator: Moderator Team

Pyotrump
Posts: 133
Joined: Wed Jun 07, 2017 12:01 pm

by Pyotrump

18th Nov. 2022.


1. Swapped the grouppo from 9100 mechanical paired with TRP spyre to
Sram red 22 mechanical & AXS 2 pieces calipers

Trp was heavy (166, 167g each) New calipers are 111g, 113g. I shaved 109g off.
But Hydraulic shifters are 72g heavier (No oil filled) So not that much change.

2. added some Polished alloy parts.
Stem, Rotor, Lock rings and flatmount adapters are de-anodized and polished.

Image
my bodyweigth scale says it is 6.75kg. (14.88lbs for imperial people.)


Image
How do you like it?

Image
Deanodized and polished Kalloy Uno stem.

Image

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



IvanZg
Posts: 280
Joined: Thu Jan 10, 2019 3:10 pm

by IvanZg

How come you did not install that d shapped Ridley fork? Did something went wrong?

Pyotrump
Posts: 133
Joined: Wed Jun 07, 2017 12:01 pm

by Pyotrump

IvanZg wrote:
Sat Nov 26, 2022 5:23 pm
How come you did not install that d shapped Ridley fork? Did something went wrong?
Hmm It is fine and all the parts are gathered but the whole re-cabling and cutting the steerer takes too much time. I have to spare my time for
upcoming bar exam, so I postponed the whole plan. Not this year.

Pyotrump
Posts: 133
Joined: Wed Jun 07, 2017 12:01 pm

by Pyotrump

I did some pointless things. stripping anodized surface and polishing!

Image
Polished parts:
Rotor Dm rings, Derailleur hanger, front thruaxle,


Image
Rotor DM rings is made of 7075 aluminum alloy, which is relativelly suceptible to corrosion exposed to elements e.g. calcium chloride, salt water, etc. I needed a protective layer. So I put 2K epoxy clear coat on rings.

Image
You can see rear mech hanger is now silver too. I also put silver guide pulley and acid green 13t tension pulley.


Upcoming items:
1. I bough OSPW pulley cage to utilise 34t cassette for future gravel rides.
2. I bought Panaracer gravelking SS 43c tires for cx wheelset lying around.

Current weight is 6580g

Pyotrump
Posts: 133
Joined: Wed Jun 07, 2017 12:01 pm

by Pyotrump

A new Wheelset arrived: Lightbicycle AR25 rims with Bitex hubs.

I asked LB to make mine sturdier than stock version. 60g was added for that.


Image
A pic after a brief test ride.


Image
Front: 505g

Image
Rear: 619g (without 5g of 10 speed cassette spacer)

total: 1124g

* Rene Herse Snoqualmie pass 44c extralite casing. 661g (321g + 340g)
* Two 6 bolt - centre lock adapters. 60g total



Image
Total weight: 6.65 +/- 50g with 2 cages, Assioma uno, Garmin mount.

I do love its glossy, paintless look. Totally satisfied (yet).

Post Reply