PF30 BB with a Shimano Road crankset? (Cannondale SuperSix Evo CX/SE)

The spirit of Grav-lo-cross. No but seriously, cyclocross and gravel go here!

Moderator: Moderator Team

Post Reply
User avatar
TonyM
Posts: 3389
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

I am looking for a possible build around this Cannondale Supersix Evo CX SE frame:
https://www.cannondale.com/en/bikes/roa ... et-c11381u

...but I see that it has a PF30 bottom bracket (and that it has a wider Q factor of +10mm if I trust some reviews on Youtube).

Can I still use a Shimano Dura Ace 9100 crankset with this frame?
(maybe with some adapters)

raisinberry777
Posts: 400
Joined: Wed Jul 30, 2014 1:09 am

by raisinberry777

This has the AI offset as well, so keep in mind for a build you'd need the specially dished wheels.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
TonyM
Posts: 3389
Joined: Thu Jan 22, 2015 4:11 pm

by TonyM

raisinberry777 wrote:
Mon Nov 11, 2024 11:10 am
This has the AI offset as well, so keep in mind for a build you'd need the specially dished wheels.
Thanks for pointing that!
Well, I will pass on that frame.

CampagYOLO
Posts: 967
Joined: Thu May 06, 2021 3:58 pm

by CampagYOLO

The crank wouldn't be an issue at all, it's the AI offset that would also be the deal breaker for me.

Post Reply