-17 stem with internal routing
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
subscribed because im looking for an alternative as well
Wilier Stemma carbon (not the stemma S which is aluminum) is -17, but it's insanely priced, you'd be lucky to find it below $600...
I've been looking a lot with no success, and eventually settled with a -13...
I've been looking a lot with no success, and eventually settled with a -13...
Litespeed Gravel Ultimate : https://tinyurl.com/zvxxy8zk
Wilier “Cento Ramato“ : https://tinyurl.com/29vs8vre
#RETIRED# Lynskey “the Do-it-all Helix” :https://tinyurl.com/bdmb5y24
Wilier “Cento Ramato“ : https://tinyurl.com/29vs8vre
#RETIRED# Lynskey “the Do-it-all Helix” :https://tinyurl.com/bdmb5y24
Which one?
This is the best option I have found so far- https://www.yoeleobike.com/collections/ ... n-stem-st1
"Only" -10*, but the stack height is a short 30mm.
"Only" -10*, but the stack height is a short 30mm.
Damn; I would have tried that if they'd offer 130mm
-
- Posts: 596
- Joined: Mon Sep 27, 2010 8:38 am
Is this still a hole in the market?
Does anyone know if you have to run the spacer w/ the Vinci stem?
Does anyone know if you have to run the spacer w/ the Vinci stem?
Yes, you'd have to run the dustcover plus the stem transition spacer. I would guess those together to be between 15 and 20 mm high.ricerocket wrote: ↑Sat Sep 23, 2023 3:42 pmIs this still a hole in the market?
Does anyone know if you have to run the spacer w/ the Vinci stem?
Road
Cube Agree C:62 SLT 2021 (frame+fork) DA 9270 6.9x kg - ride-ready 7.25 kg w/pedals, cages, sensors, Wahoo mount
Gravel
Velobuild GF-002 Force AXS 7.5 kg, ride-ready 7.775 kg w/200 ml Stan‘s, pedals, cages, sensors, Wahoo/Cateye mounts
Cube Agree C:62 SLT 2021 (frame+fork) DA 9270 6.9x kg - ride-ready 7.25 kg w/pedals, cages, sensors, Wahoo mount
Gravel
Velobuild GF-002 Force AXS 7.5 kg, ride-ready 7.775 kg w/200 ml Stan‘s, pedals, cages, sensors, Wahoo/Cateye mounts
-
- Posts: 596
- Joined: Mon Sep 27, 2010 8:38 am
So I acquired this Deda Vinci stem, unfortunately the bar clamping width is too much for the bars I plan on running.
I found another option from Profile Design newly released this year. It's designed for tri bikes (and has a hydration system mount which is the dicknose on the front), but it's still lighter than the Deda, and allows for steerer mounted Di2. Only downside is it's only available in 80mm and 105mm so far. I'll see how this plays out.
https://profile-design.com/collections/ ... 0758964287
I found another option from Profile Design newly released this year. It's designed for tri bikes (and has a hydration system mount which is the dicknose on the front), but it's still lighter than the Deda, and allows for steerer mounted Di2. Only downside is it's only available in 80mm and 105mm so far. I'll see how this plays out.
https://profile-design.com/collections/ ... 0758964287
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com