EXS Aerover Cockpit
Moderator: robbosmans
- MrCurrieinahurry
- Moderator
- Posts: 4828
- Joined: Wed Apr 22, 2020 3:01 pm
- Location: London
Mount and mount with go pro adapter
Basso Diamante eps 12
Basso Diamante eps 12
Formerly known as Curryinahurry
- MrCurrieinahurry
- Moderator
- Posts: 4828
- Joined: Wed Apr 22, 2020 3:01 pm
- Location: London
And their top capmathias720 wrote:how much is included in this weight?MrCurrieinahurry wrote: ↑Wed Nov 30, 2022 4:22 pmVideos on my insta but 130x400 is 338gs. Quality looks and feels very nice.
Basso Diamante eps 12
the handlebar and the steerer adapter only or anything else ?
Basso Diamante eps 12
Formerly known as Curryinahurry
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 242
- Joined: Tue Oct 19, 2021 8:14 am
How much is the steerer adapther? do we know if there is any upgrades available here? like getting a carbon one made or something ?MrCurrieinahurry wrote: ↑Thu Dec 01, 2022 7:25 amAnd their top capmathias720 wrote:how much is included in this weight?MrCurrieinahurry wrote: ↑Wed Nov 30, 2022 4:22 pmVideos on my insta but 130x400 is 338gs. Quality looks and feels very nice.
Basso Diamante eps 12
the handlebar and the steerer adapter only or anything else ?
Basso Diamante eps 12
It was weighed a few pages backmathias720 wrote: ↑Thu Dec 01, 2022 11:30 amHow much is the steerer adapther? do we know if there is any upgrades available here? like getting a carbon one made or something ?MrCurrieinahurry wrote: ↑Thu Dec 01, 2022 7:25 amAnd their top capmathias720 wrote:how much is included in this weight?MrCurrieinahurry wrote: ↑Wed Nov 30, 2022 4:22 pmVideos on my insta but 130x400 is 338gs. Quality looks and feels very nice.
Basso Diamante eps 12
the handlebar and the steerer adapter only or anything else ?
Basso Diamante eps 12
-
- Posts: 431
- Joined: Sun Jun 26, 2016 3:33 pm
-
- Posts: 242
- Joined: Tue Oct 19, 2021 8:14 am
Just found it. its 29Gram damn!BigBoyND wrote: ↑Thu Dec 01, 2022 1:19 pmIt was weighed a few pages backmathias720 wrote: ↑Thu Dec 01, 2022 11:30 amHow much is the steerer adapther? do we know if there is any upgrades available here? like getting a carbon one made or something ?MrCurrieinahurry wrote: ↑Thu Dec 01, 2022 7:25 amAnd their top capmathias720 wrote:
how much is included in this weight?
the handlebar and the steerer adapter only or anything else ?
Basso Diamante eps 12
but then i also noticed you can use another sleeve to make it -13 degree?
can anyone point me in a direction for such a sleeve? first time building with these sleeve adapters.
preferably a lighter one
-
- Posts: 242
- Joined: Tue Oct 19, 2021 8:14 am
i got my 130/36 in the mail today here are some stats.
handlebar including stem screws= 303,8
topcap= 9 gram
screw for top cap= 3,9gram (way to long, found one in drawer that is shorter at 1,9 gram)
Stem shim (factor ostro 3d printed version) 4,4Gram
factor ostro spacer =5,3gram
Factor headset cover= 6,9 gram
garmin mount (no gopro)=32,2(33,4 including screws)
Seems really nice, havent mounted it yet.
only downsides seems to be.
garmin mount sits really far from the handlebar (i am gonna make a custom 3d printed one)
and the headset cover for factor is higher than the original one
lowest spacer for factor is high aswell.
will discuss with exs if it is possible to make lower versions.
quality seems good.
handlebar including stem screws= 303,8
topcap= 9 gram
screw for top cap= 3,9gram (way to long, found one in drawer that is shorter at 1,9 gram)
Stem shim (factor ostro 3d printed version) 4,4Gram
factor ostro spacer =5,3gram
Factor headset cover= 6,9 gram
garmin mount (no gopro)=32,2(33,4 including screws)
Seems really nice, havent mounted it yet.
only downsides seems to be.
garmin mount sits really far from the handlebar (i am gonna make a custom 3d printed one)
and the headset cover for factor is higher than the original one
lowest spacer for factor is high aswell.
will discuss with exs if it is possible to make lower versions.
quality seems good.
Where did you manage to find a lighter stem shim? Stock one feels indestructible but it's quite heavy.mathias720 wrote: ↑Thu Dec 01, 2022 7:37 pmi got my 130/36 in the mail today here are some stats.
handlebar including stem screws= 303,8
topcap= 9 gram
screw for top cap= 3,9gram (way to long, found one in drawer that is shorter at 1,9 gram)
Stem shim (factor ostro 3d printed version) 4,4Gram
factor ostro spacer =5,3gram
Factor headset cover= 6,9 gram
garmin mount (no gopro)=32,2(33,4 including screws)
Seems really nice, havent mounted it yet.
only downsides seems to be.
garmin mount sits really far from the handlebar (i am gonna make a custom 3d printed one)
and the headset cover for factor is higher than the original one
lowest spacer for factor is high aswell.
will discuss with exs if it is possible to make lower versions.
quality seems good.
-
- Posts: 242
- Joined: Tue Oct 19, 2021 8:14 am
This was included with my handlebar. but seems to be a parts of the Factor ostro custom spacer package as it has the cutout for cables and was in same bag as the spacers for that bike aswell.crazychaz wrote: ↑Fri Dec 02, 2022 6:18 amWhere did you manage to find a lighter stem shim? Stock one feels indestructible but it's quite heavy.mathias720 wrote: ↑Thu Dec 01, 2022 7:37 pmi got my 130/36 in the mail today here are some stats.
handlebar including stem screws= 303,8
topcap= 9 gram
screw for top cap= 3,9gram (way to long, found one in drawer that is shorter at 1,9 gram)
Stem shim (factor ostro 3d printed version) 4,4Gram
factor ostro spacer =5,3gram
Factor headset cover= 6,9 gram
garmin mount (no gopro)=32,2(33,4 including screws)
Seems really nice, havent mounted it yet.
only downsides seems to be.
garmin mount sits really far from the handlebar (i am gonna make a custom 3d printed one)
and the headset cover for factor is higher than the original one
lowest spacer for factor is high aswell.
will discuss with exs if it is possible to make lower versions.
quality seems good.
its 3d printed but nice and lightweight.
Ah so that's what it was! Couldn't figure out what that piece was. Weighs 5g on my scale.mathias720 wrote: ↑Fri Dec 02, 2022 7:19 amThis was included with my handlebar. but seems to be a parts of the Factor ostro custom spacer package as it has the cutout for cables and was in same bag as the spacers for that bike aswell.crazychaz wrote: ↑Fri Dec 02, 2022 6:18 amWhere did you manage to find a lighter stem shim? Stock one feels indestructible but it's quite heavy.mathias720 wrote: ↑Thu Dec 01, 2022 7:37 pmi got my 130/36 in the mail today here are some stats.
handlebar including stem screws= 303,8
topcap= 9 gram
screw for top cap= 3,9gram (way to long, found one in drawer that is shorter at 1,9 gram)
Stem shim (factor ostro 3d printed version) 4,4Gram
factor ostro spacer =5,3gram
Factor headset cover= 6,9 gram
garmin mount (no gopro)=32,2(33,4 including screws)
Seems really nice, havent mounted it yet.
only downsides seems to be.
garmin mount sits really far from the handlebar (i am gonna make a custom 3d printed one)
and the headset cover for factor is higher than the original one
lowest spacer for factor is high aswell.
will discuss with exs if it is possible to make lower versions.
quality seems good.
its 3d printed but nice and lightweight.
IMG_1090.jpeg
Probably developed for certain d-shaped fork frame. My friend's helium needs that opening for wires to go through. Not sure if ostro also does.crazychaz wrote: ↑Fri Dec 02, 2022 8:43 amAh so that's what it was! Couldn't figure out what that piece was. Weighs 5g on my scale.mathias720 wrote: ↑Fri Dec 02, 2022 7:19 amThis was included with my handlebar. but seems to be a parts of the Factor ostro custom spacer package as it has the cutout for cables and was in same bag as the spacers for that bike aswell.crazychaz wrote: ↑Fri Dec 02, 2022 6:18 amWhere did you manage to find a lighter stem shim? Stock one feels indestructible but it's quite heavy.mathias720 wrote: ↑Thu Dec 01, 2022 7:37 pmi got my 130/36 in the mail today here are some stats.
handlebar including stem screws= 303,8
topcap= 9 gram
screw for top cap= 3,9gram (way to long, found one in drawer that is shorter at 1,9 gram)
Stem shim (factor ostro 3d printed version) 4,4Gram
factor ostro spacer =5,3gram
Factor headset cover= 6,9 gram
garmin mount (no gopro)=32,2(33,4 including screws)
Seems really nice, havent mounted it yet.
only downsides seems to be.
garmin mount sits really far from the handlebar (i am gonna make a custom 3d printed one)
and the headset cover for factor is higher than the original one
lowest spacer for factor is high aswell.
will discuss with exs if it is possible to make lower versions.
quality seems good.
its 3d printed but nice and lightweight.
IMG_1090.jpeg
sworks sl8 rtp 56 5.77kg
factor ostro vam 56 6.15kg
specialized allez sprint 2023 7.13kg
retired:
Lapierre aircode 2017
specialized sl7 56 6.75kg
factor ostro vam 56 6.15kg
specialized allez sprint 2023 7.13kg
retired:
Lapierre aircode 2017
specialized sl7 56 6.75kg
-
- Posts: 628
- Joined: Wed Jun 28, 2017 8:59 am
Where did you order it from to be delivered outside of China?MrCurrieinahurry wrote: ↑Wed Nov 30, 2022 4:22 pmVideos on my insta but 130x400 is 338gs. Quality looks and feels very nice.
Does this apply to wheels (LB, Farsports) too?
Minimum bike categories required in the stable:
Aero bike | GC bike | GC rim bike | Climbing bike | Climbing rim bike | Classics bike | Gravel bike | TT bike | Indoors bike
Aero bike | GC bike | GC rim bike | Climbing bike | Climbing rim bike | Classics bike | Gravel bike | TT bike | Indoors bike
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com