Ultralight bicycle parts by Lucendi
Moderator: robbosmans
@ velov
Thanks! I have my existing designs, and I am working on new ones and I can also make custom parts on request. If you have a simple handmade drawing of something I can probably model and print it.
@ MrCurrieinahurry
Thank you!
Thanks! I have my existing designs, and I am working on new ones and I can also make custom parts on request. If you have a simple handmade drawing of something I can probably model and print it.
@ MrCurrieinahurry
Thank you!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
@ micky
I am looking forward to hearing your thought on the UL vs the SUB1 bar end plugs!
@ alanyu
Thanks!
@ eucalyptus
Tack!
@ mdeth1313
I'm glad you like them!
I am looking forward to hearing your thought on the UL vs the SUB1 bar end plugs!
@ alanyu
Thanks!
@ eucalyptus
Tack!
@ mdeth1313
I'm glad you like them!
Hi there!
First of all congratulations on the setup! It looks really neat!
It makes me want to buy a 3D printer for myself, but for the moment I can't justify buying one.
I was wondering if you would do a mount for the Garmin Varia Radar on an S-Works with SWAT mounting points saddle.
Similar to this one:
This one would be ok to me if not for Shapeways shipping costs which are damn right outrageous! It costs almost as much as the product itself.
I've sent a bike fork overseas some weeks ago for less than what they charge.
I even complained to them, but they just told me there is a discount for first-time buyers
First of all congratulations on the setup! It looks really neat!
It makes me want to buy a 3D printer for myself, but for the moment I can't justify buying one.
I was wondering if you would do a mount for the Garmin Varia Radar on an S-Works with SWAT mounting points saddle.
Similar to this one:
This one would be ok to me if not for Shapeways shipping costs which are damn right outrageous! It costs almost as much as the product itself.
I've sent a bike fork overseas some weeks ago for less than what they charge.
I even complained to them, but they just told me there is a discount for first-time buyers
@ card0s
Hello, and thank you!
I could make this. The garmin mount tray would have to be an injection moulded piece for dimensional accuracy and wear resistance. The tray would be fastened with screws to the 3D-printed part using heat inserts.
Also a flatter design would be much stronger when 3D-printed.
There are already a tonne of products like this though and just googling it I found this has already been done exactly as I would have liked to do it;
Etsy
Hello, and thank you!
I could make this. The garmin mount tray would have to be an injection moulded piece for dimensional accuracy and wear resistance. The tray would be fastened with screws to the 3D-printed part using heat inserts.
Also a flatter design would be much stronger when 3D-printed.
There are already a tonne of products like this though and just googling it I found this has already been done exactly as I would have liked to do it;
Etsy
Last edited by Lucendi on Sat Jul 23, 2022 10:34 am, edited 1 time in total.
@ card0s
I see, I can probably help you out with that. I sent you a PM.
I see, I can probably help you out with that. I sent you a PM.
Prototyping new designs just got a whole lot faster!
Here printing a test of a Garmin Varia mount.
Here printing a test of a Garmin Varia mount.
I have been working on this bicycle wall mount design for a long time, and I finanlly decided it was time to print it.
It is designed for Speedplay pedals specifically, but the pedal holder can be sized up to fit any pedal system.
The wheel holders have a lightweight and strong honeycomb pattern.
The pedal holder is printed in carbon fiber reinforced nylon and the wheel holders in ABS.
I run tubulars with latex inners and they'll go flat in a matter of days and the weight will transfer to the pedal holder more and more, thus the choice of carbon fiber reinforced nylon for the pedal holder.
It is designed for Speedplay pedals specifically, but the pedal holder can be sized up to fit any pedal system.
The wheel holders have a lightweight and strong honeycomb pattern.
The pedal holder is printed in carbon fiber reinforced nylon and the wheel holders in ABS.
I run tubulars with latex inners and they'll go flat in a matter of days and the weight will transfer to the pedal holder more and more, thus the choice of carbon fiber reinforced nylon for the pedal holder.
-
- Posts: 495
- Joined: Fri Apr 30, 2021 8:22 am
Really cool stuff.
Scott Addict RC 20 2021
Ridley Kanzo Adventure 2022
Ridley Kanzo Adventure 2022
@ Hexsense
That looks great! I'm glad we got the fit right.
@ Roadbiker10
Thanks!
That looks great! I'm glad we got the fit right.
@ Roadbiker10
Thanks!
-
- Posts: 279
- Joined: Tue Jan 06, 2015 5:13 pm
my bar end plugs arrived and very happy with them thanks
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com