Pro Vibe Evo (Shimano integrated cockpit)
Moderator: robbosmans
-
- Posts: 2491
- Joined: Tue Mar 31, 2020 3:37 pm
An here is the 380/115 - the quality is even worse. So much visible glue and really really bad gaps... yikes!
Cervelo P5 Disc (2021) 9.1kg
Factor Ostro Gravel (2023) 8.0kg
S-Works SL8 (2023) 6.3kg
*weights are race ready, size 58/L.
Sold: Venge, S5 Disc, Roubaix Team, Open WI.DE, Émonda, Shiv TT, Crux, Aethos, SL7
Factor Ostro Gravel (2023) 8.0kg
S-Works SL8 (2023) 6.3kg
*weights are race ready, size 58/L.
Sold: Venge, S5 Disc, Roubaix Team, Open WI.DE, Émonda, Shiv TT, Crux, Aethos, SL7
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 129
- Joined: Sun Jan 07, 2007 2:59 am
- Location: NorCal
They work great on the Parlee Rz7 and look great on that bike too. Definetly pair better with full aero bikes. Most of the builds I've seen with them have the bar tape going up and over the rubber flap above the hoods a bit like most aero bars.
When you say "they look great on the Rz7" are you saying the factory spacers and top cover from Parlee share the same dimension neck down? From the photo entries here it doesn't appear the Evo comes with any complementing piece other than the bar.Charlie Chan wrote: ↑Tue Mar 08, 2022 12:06 amThey work great on the Parlee Rz7 and look great on that bike too. Definetly pair better with full aero bikes. Most of the builds I've seen with them have the bar tape going up and over the rubber flap above the hoods a bit like most aero bars.
-
- Posts: 129
- Joined: Sun Jan 07, 2007 2:59 am
- Location: NorCal
Yes the Rz7's spacers look pretty good with this bar and while they they dont match 100% they are close. Ive seen three builds with it and all looked good.Check out "Kaoscustombikes" on instagram where you can see a few pics. That said, I cant stand lots of spacers on an aero bike. The RZ7 in particular looks terrible to me when folks stack the spacers high!engsohere wrote: ↑Tue Mar 08, 2022 7:08 pmWhen you say "they look great on the Rz7" are you saying the factory spacers and top cover from Parlee share the same dimension neck down? From the photo entries here it doesn't appear the Evo comes with any complementing piece other than the bar.Charlie Chan wrote: ↑Tue Mar 08, 2022 12:06 amThey work great on the Parlee Rz7 and look great on that bike too. Definetly pair better with full aero bikes. Most of the builds I've seen with them have the bar tape going up and over the rubber flap above the hoods a bit like most aero bars.
[mention]MatosVelo [/mention] who publishes here regularly has one on his new bike. That's the very first one I see on a real-bike.
https://twitter.com/matosvelo/status/16 ... 7412905990
Matos Velo is not an individual person, but an online cycling gear review website here in France.C36 wrote: ↑Mon Jan 23, 2023 12:11 am[mention]MatosVelo [/mention] who publishes here regularly has one on his new bike. That's the very first one I see on a real-bike.
https://twitter.com/matosvelo/status/16 ... 7412905990
Well, there is a person with the Matosvelo name, here on WW, who is indeed person driving the website. He doesn’t post often but since this bar is quite rare, he is the only person that came in mind to answer Tymon question.naylor343 wrote:Matos Velo is not an individual person, but an online cycling gear review website here in France.C36 wrote: ↑Mon Jan 23, 2023 12:11 am[mention]MatosVelo [/mention] who publishes here regularly has one on his new bike. That's the very first one I see on a real-bike.
https://twitter.com/matosvelo/status/16 ... 7412905990
-
- Posts: 1014
- Joined: Tue Apr 14, 2015 4:35 am
i disagree with some of the negative comments re quality above at least for the sample i got. i noticed they did update the part numbers (which the commercial site STILL doesn't reflect btw..) no glue residue, good finishing, and actually decent design. and the remote shifter integration is actually pretty slick. they look alot better in person than in pics. putting these on a Parlee RZ7 with the horrible stock bar bend. About 15-20 gr lighter overall than that 2-piece OE bar.
410gr without 1.125 shim. ~405mm c-c at hoods. ~425 c-c at drops. Sz 40x105
410gr without 1.125 shim. ~405mm c-c at hoods. ~425 c-c at drops. Sz 40x105
Last edited by FactoryMatt on Sun Mar 12, 2023 4:55 pm, edited 1 time in total.
-
- Posts: 263
- Joined: Wed Jun 17, 2020 8:42 am
Is this a size 40 or a 42?FactoryMatt wrote:i disagree with some of the negative comments re quality above at least for the sample i got. i noticed they did update the part numbers (which the commercial site STILL doesn't reflect btw..) no glue residue, good finishing, and actually decent design. and the remote shifter integration is actually pretty slick. they look alot better in person than in pics. putting these on a Parlee RZ7 with the horrible stock bar bend. About 15-20 gr lighter overall than that 2-piece OE bar.
410gr without 1.125 shim. ~405mm c-c at hoods. ~425 c-c at drops.
Sent from my iPhone using Tapatalk
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com