Page 3 of 3
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Tue Aug 17, 2021 4:40 pm
by BadBoyR
ryanw wrote:The inner pickups are much bigger and teeth profiles have been changed / improved.
Top man Ryan, flawless shifting with mine on the SL7.
Sent from my iPhone using Tapatalk
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Tue Aug 17, 2021 4:40 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Tue Aug 17, 2021 8:32 pm
by Matte86
ryanw wrote:The inner pickups are much bigger and teeth profiles have been changed / improved.
If I were in the UK I’d definitely make you as my trusty LBS
Once I get the chance to come over to the UK for holidays I’ll come by to say thanks in person.. you cannot imagine how important was the problem you solved
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Tue Aug 17, 2021 9:19 pm
by ryanw
Just a bloke who enjoys playing with bikes and helping out where I can.
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Sun Jul 24, 2022 3:28 pm
by maxle
Do you guys have a picture of the inner pickups of the EVO Axs chainrings? I have several shifting issues and I'm not sure if i bought the old version of the chainrings.
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Sun Jul 24, 2022 4:49 pm
by kode54
I'll be getting a set of EVO v2 soon to replace my v1. Will snap a pic and upload as soon as I get it in a few days if someone doesn't beat me to it.
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Tue Nov 29, 2022 11:34 pm
by fporter
deleted
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Tue Nov 29, 2022 11:37 pm
by fporter
Hello, I'm about to pull the trigger on upgrading from 11spd to AXS 12 speed. My bike is a Tarmac SL6 with SWorks crankset and 110x5 quarq power meter which I'd like to keep so it seems my only path is to use the Carbon Ti 110x5 AXS rings. Likely getting the 50/37 set to be used with Red derailleurs, 10-33 Red cassette and of course 12 speed Flat Top chain.
The V2 update to the Carbon Ti rings sounded encouraging on shifting performance. Anyone else with more recent experience using these chainrings that could share the results?
thanks!
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Wed Nov 30, 2022 2:12 am
by HappyGuy
I've found that r2-bikes.com has good variety and prices for the Carbon Ti rings, at least for the 110mm round ones.
https://r2-bike.com/navi.php?qs=CARBON+ ... 37&search=
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Wed Nov 30, 2022 5:23 am
by markdjr
I also struggled with this combo. Once I moved the derailleur as close as possible (low) to the big ring, shifting has been great.
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Wed Nov 30, 2022 4:49 pm
by fporter
Thanks!
I found the rings available at R2-bike and LordGun.
Re: Carbon-Ti + THM Clavicula SE + SRAM Red AXS
Posted: Fri Dec 16, 2022 6:43 pm
by fporter
Thanks to the encouraging reports about the Carbon-Ti rings here I went for it and am happy to report that the setup is working quite well. 50/37 rings with a 10-33 cassette and Force chain. The clearance between the FD cage and the Specialized crank arm is quite small. Setting up the FD wasn't to bad. There was some back and forth getting the angle right with the wedge. Without the wedge the rear of the FD cage was angled inward. Then installing the wedge would push it out. I locktited the wedge screw as it'd be a bummer if the wedge worked loose mid-ride some day. The tiny torx screw at the rear of the FD cage was a little loose out of the box.