Factor Ostro
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
- Posts: 268
- Joined: Wed Jan 08, 2020 9:06 pm
Hi. Received my frameset recently. It might be a stupid question, but is it normal to have a hole on the bottom of the frame? If yes, do you tape this to prevent water going in?
Last edited by flmo on Wed Jan 04, 2023 7:45 pm, edited 1 time in total.
- robbosmans
- Moderator
- Posts: 2793
- Joined: Sun Aug 26, 2018 12:40 pm
- Location: Central Belgium
- Contact:
yes that’s obviously normal, so water can get out of your frame
Yesterday I mounted a pair of 32c Vittoria Corsa Next tires (on Enve 2.3 wheels) and found they had plenty of room on the 61cm frame. Anyone using a 61cm frame try something larger?
I'd be curious to see if the 34c Corsa Next's could work or even the 35c RH Bon Jon's.
-Thanks, Todd
I'd be curious to see if the 34c Corsa Next's could work or even the 35c RH Bon Jon's.
-Thanks, Todd
-
- Posts: 50
- Joined: Fri Jan 28, 2022 2:11 am
engsohere wrote: ↑Fri Jul 29, 2022 10:12 amAs others have mentioned, it comes with 29mm and 24mm reducers. If anyone's thinking about using GXP go with these ones by Prime. They're made of aluminum, not plastic resin and there's a rubber gasket and seal.Rkreddevil wrote:Hi,
I'm planning to buy Ostro Frameset, does the frameset come with t47 bb for either Shimano 24 or Sram dub. Does the frame have standard t47 bb? Is anyone running rotor carbon cranks with 30mm spindle. If yes, which bottom bracket are you using?
Sent from my A574BL using Tapatalk
Anyone know where I can purchase these adaptors? I seem to have lost the adaptor for SRAM dub and can't find anywhere to buy in the US.
The thin DUB spacers are harder to get. But here for example:
https://r2-bike.com/CHRIS-KING-Innenlag ... A-MTB-Road
https://r2-bike.com/CHRIS-KING-Spacer-K ... Innenlager
https://www.bike24.de/p1538319.html (0,5mm, but no in stock) -> https://wheelsmfg.com/29mm-id-x-0-5mm-c ... of-10.html
https://www.bike-discount.de/de/sram-du ... cer-kit-v3 (SRAM Kit > 2mm)
https://r2-bike.com/CHRIS-KING-Innenlag ... A-MTB-Road
https://r2-bike.com/CHRIS-KING-Spacer-K ... Innenlager
https://www.bike24.de/p1538319.html (0,5mm, but no in stock) -> https://wheelsmfg.com/29mm-id-x-0-5mm-c ... of-10.html
https://www.bike-discount.de/de/sram-du ... cer-kit-v3 (SRAM Kit > 2mm)
-
- Posts: 45
- Joined: Sat Dec 26, 2020 7:44 pm
Where did you get the "superlight" carbon cranks? Are they are new version to the normal Aldhu carbon cranks? How much lighter?tmanley wrote: ↑Tue Jan 03, 2023 1:46 amMy Rotor configuration was the following:
Axle - 30mm Standard Road
Crank - Aldhu Carbon Superlight
Spacers - Standard Road Kit (bought these just in case I needed them)
BB - Factor uses the 30mm T47 CeramicSpeed BB (Factor ships the 24mm Wheels MFG BBRight reducers/adaptors with the bike - at least it did with mine - in case you want to use something like the Dura-ace crankset)
-
- Posts: 50
- Joined: Fri Jan 28, 2022 2:11 am
Ah so you think this should work? https://www.biketiresdirect.com/product ... dub-cranksErwin wrote: ↑Mon Jan 09, 2023 8:48 amThe thin DUB spacers are harder to get. But here for example:
https://r2-bike.com/CHRIS-KING-Innenlag ... A-MTB-Road
https://r2-bike.com/CHRIS-KING-Spacer-K ... Innenlager
https://www.bike24.de/p1538319.html (0,5mm, but no in stock) -> https://wheelsmfg.com/29mm-id-x-0-5mm-c ... of-10.html
https://www.bike-discount.de/de/sram-du ... cer-kit-v3 (SRAM Kit > 2mm)
- wheelsONfire
- Posts: 6299
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
Probably Rotor USA trying to be cool!hansotto089 wrote: ↑Mon Jan 09, 2023 12:41 pmWhere did you get the "superlight" carbon cranks? Are they are new version to the normal Aldhu carbon cranks? How much lighter?tmanley wrote: ↑Tue Jan 03, 2023 1:46 amMy Rotor configuration was the following:
Axle - 30mm Standard Road
Crank - Aldhu Carbon Superlight
Spacers - Standard Road Kit (bought these just in case I needed them)
BB - Factor uses the 30mm T47 CeramicSpeed BB (Factor ships the 24mm Wheels MFG BBRight reducers/adaptors with the bike - at least it did with mine - in case you want to use something like the Dura-ace crankset)
https://rotoramerica.com/products/aldhu ... et-builder
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Yes, I think they should fit. The both on the right side should be 1mm spacers, the others are bigger. As long as you don't need 0,5mm spacer you should be fine.MysticRiver wrote: ↑Mon Jan 09, 2023 3:58 pmAh so you think this should work? https://www.biketiresdirect.com/product ... dub-cranksErwin wrote: ↑Mon Jan 09, 2023 8:48 amThe thin DUB spacers are harder to get. But here for example:
https://r2-bike.com/CHRIS-KING-Innenlag ... A-MTB-Road
https://r2-bike.com/CHRIS-KING-Spacer-K ... Innenlager
https://www.bike24.de/p1538319.html (0,5mm, but no in stock) -> https://wheelsmfg.com/29mm-id-x-0-5mm-c ... of-10.html
https://www.bike-discount.de/de/sram-du ... cer-kit-v3 (SRAM Kit > 2mm)
Already searched for the "superlight" version and found the same.wheelsONfire wrote: ↑Mon Jan 09, 2023 4:33 pmProbably Rotor USA trying to be cool!
https://rotoramerica.com/products/aldhu ... et-builder
There is only one Rotor Aldhu Carbon available...
Finally finished my build after lightbicycle AR55 flyweight built with extralite spd3 arrived. 6.32kg with computer mount,pedals and one tune cage.
sworks sl8 rtp 56 5.77kg
factor ostro vam 56 6.15kg
specialized allez sprint 2023 7.13kg
retired:
Lapierre aircode 2017
specialized sl7 56 6.75kg
factor ostro vam 56 6.15kg
specialized allez sprint 2023 7.13kg
retired:
Lapierre aircode 2017
specialized sl7 56 6.75kg
-
- Posts: 43
- Joined: Tue Feb 06, 2018 4:39 pm
This looks amazing, congratulations to that beautiful looking and really light Ostro!
Which hanger are you using?
Which hanger are you using?
-
- Posts: 45
- Joined: Sat Dec 26, 2020 7:44 pm
Also, what's that fancy crank setup? With powermeter?
The crankarm is elilee xxe with xcadey powermeter. The hanger is NIUJU direct hanger for ostro, you can probably find it on aliexpress.
sworks sl8 rtp 56 5.77kg
factor ostro vam 56 6.15kg
specialized allez sprint 2023 7.13kg
retired:
Lapierre aircode 2017
specialized sl7 56 6.75kg
factor ostro vam 56 6.15kg
specialized allez sprint 2023 7.13kg
retired:
Lapierre aircode 2017
specialized sl7 56 6.75kg
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com