New Scott foil.. at last!

[snaxez]

EXS aerover has custom 3d printed top cover and spacers, and a shim for 1" steerer. And they do 38x130 and 38x140.
https://www.instagram.com/p/Cq9fLFQhQqi/
https://www.instagram.com/p/CrCjt4nOieT/
https://exs-cycling.com/products/aerove ... -handlebar

the EXS Aerover bar has been out of stock, in ALL sizes, for a long time now.

They come and go. You have to check like once a day. I ordered my 400x90 like a month ago.

[aham23]

can someone tell me what the torque spec is for the top cap? i know the steerer expander plug is 8nm and have the general tech data sheet for all the others.

[TheBelgian]

There should be no torque spec. You just tighten it until the preload on the bearings is ok.

[Lelandjt]

Has the derailleur hanger changed from 2022 to 2023?

[CFrancis515]

Has the derailleur hanger changed from 2022 to 2023?

Yes it has, and its a bitch to find a replacment, especially for Shimano direct mount! I had to go through my local Scott dealer and have them order me 2 of them. You wont find them available online.

[aham23]

Has the derailleur hanger changed from 2022 to 2023?

search my name here in this thread. the MY23 Foil hanger is actually the same as the Addict hanger which can be found online.

https://www.pedalon.co.uk/acatalog/Scot ... -MY23.html

https://bobs-bicycles.com/shop/componen ... er-277545/

[mrbrown4001]

Does anyone remember the name of the bike shop that 3d prints spacers and shims for the new foil to work with any integrated cockpit?


Sent from my iPhone using Tapatalk

[Lelandjt]

https://bobs-bicycles.com/shop/componen ... er-277545/

Ordered this for the swap from Red to Dura-ace.

[snaxez]

How noticeable is the swap from old gen foil disc (up to 2022) to new 2023+ Foil?
I have a 2019 Scott Foil Premium Team Edition Disc (HMX SL) and have a option to buy a 2023 Foil RC Ultimate frameset (HMX SL)
Wondering is the swap worth it.

[CFrancis515]

double post

[CFrancis515]

Has the derailleur hanger changed from 2022 to 2023?

search my name here in this thread. the MY23 Foil hanger is actually the same as the Addict hanger which can be found online.

https://www.pedalon.co.uk/acatalog/Scot ... -MY23.html

https://bobs-bicycles.com/shop/componen ... er-277545/

No its not, I tried it, they look very similar but they are not the same. I have the addict hanger you are referencing in my toolbox collecting dust as we speak.

[CFrancis515]

double post

[Lelandjt]

Has the derailleur hanger changed from 2022 to 2023?

search my name here in this thread. the MY23 Foil hanger is actually the same as the Addict hanger which can be found online.

https://www.pedalon.co.uk/acatalog/Scot ... -MY23.html

https://bobs-bicycles.com/shop/componen ... er-277545/

No its not, I tried it, they look very similar but they are not the same. I have the addict hanger you are referencing in my toolbox collecting dust as we speak.

I couldn't find a Foil DM hanger anywhere, so I've got an Addict hanger on the way. Maybe I'll test fit and try dremeling to make it work.

[aham23]

EXS aerover has custom 3d printed top cover and spacers, and a shim for 1" steerer. And they do 38x130 and 38x140.
https://www.instagram.com/p/Cq9fLFQhQqi/
https://www.instagram.com/p/CrCjt4nOieT/
https://exs-cycling.com/products/aerove ... -handlebar

the EXS Aerover bar has been out of stock, in ALL sizes, for a long time now.

They come and go. You have to check like once a day. I ordered my 400x90 like a month ago.

any idea what the bar looks like if you need spacers, and not just the top cap as pictured? does EXS actually provide spacers beyound just the top cap? i could not locate any pictures of this. i did go ahead and just order a 40/120 combo as they came back in stock. however, i need to run some spacers on top of the "top cap."

[snaxez]

EXS aerover has custom 3d printed top cover and spacers, and a shim for 1" steerer. And they do 38x130 and 38x140.
https://www.instagram.com/p/Cq9fLFQhQqi/
https://www.instagram.com/p/CrCjt4nOieT/
https://exs-cycling.com/products/aerove ... -handlebar

the EXS Aerover bar has been out of stock, in ALL sizes, for a long time now.

They come and go. You have to check like once a day. I ordered my 400x90 like a month ago.

any idea what the bar looks like if you need spacers, and not just the top cap as pictured? does EXS actually provide spacers beyound just the top cap? i could not locate any pictures of this. i did go ahead and just order a 40/120 combo as they came back in stock. however, i need to run some spacers on top of the "top cap."

For spacers above the stem you need to source some 1" spacers. You can look at amazon for example.