Same for me, switched from a 6 deg. to 12 deg. SL7 stem, without changing any other parts.
2020 Specialized Tarmac SL7
Moderator: robbosmans
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
I also have this bar and can confirm it is very comfortable and stiff. Highly recommend.BBres wrote: ↑Fri Feb 24, 2023 11:50 amI'd go with a Pro Vibe Aero SL and make it look just like a Remco's setup. I've got this handlebar and it's superb.LP119 wrote: ↑Thu Feb 23, 2023 11:45 amHi all,
I'm waiting for my new SL7 Expert to arrive and I'm looking to buy an aero handlebar and there's currently no stock for the Roval Rapide. On the Seka website they mentionned that their integrated handlebar is compatible with the SL7 but I've never seen anyone running this. There's not much info on this but wanted to know is somone already tried and what it looked like?
Thanks!
Hi
Looking for help for aero bar for my Tarmac SL7. I currently have Aerofly 2 in a 40cm which I feel is slightly too wide I have been searching found a few below would appreciate any advice or recommendations which are fully compatible. I would require 36-38cm centre to centre bar with similar reach of Aerofly 2 which I think is 80mm
Thanks
https://www.singletrackbikes.co.uk/m7b0 ... ars_-_Drop
https://ogevkinbike.com/collections/han ... dlebar-eu-
https://www.wiggle.co.uk/prime-primaver ... -handlebar
https://www.santafixie.co.uk/pro-plt-ca ... black.html
Regards
James
Looking for help for aero bar for my Tarmac SL7. I currently have Aerofly 2 in a 40cm which I feel is slightly too wide I have been searching found a few below would appreciate any advice or recommendations which are fully compatible. I would require 36-38cm centre to centre bar with similar reach of Aerofly 2 which I think is 80mm
Thanks
https://www.singletrackbikes.co.uk/m7b0 ... ars_-_Drop
https://ogevkinbike.com/collections/han ... dlebar-eu-
https://www.wiggle.co.uk/prime-primaver ... -handlebar
https://www.santafixie.co.uk/pro-plt-ca ... black.html
Regards
James
Thanks for the reply do you know the measurements of your bar outside to outside at hoods and drops? my 400mm Aerofly 2 is 420mm across the hoods and just under 430mm at the drops with tape installed. The reason I ask is I want to be sure going one size down will be sufficient.
-
- Posts: 138
- Joined: Fri May 30, 2008 2:05 am
In europe enough stock of this handlebar.GONE4ARIDE wrote: ↑Sat Feb 25, 2023 6:06 pmGreat suggestion. I have a 40cm on my S-Works Tarmac SL6 and I love it. Good luck finding one though.
-
- Posts: 138
- Joined: Fri May 30, 2008 2:05 am
You are fortunate. Availabililty of Pro components here in the USA has been virtually non-existent for the past 12-18 months.ODC wrote: ↑Sat Feb 25, 2023 6:08 pmIn europe enough stock of this handlebar.GONE4ARIDE wrote: ↑Sat Feb 25, 2023 6:06 pmGreat suggestion. I have a 40cm on my S-Works Tarmac SL6 and I love it. Good luck finding one though.
at hoods 44 cm , same on the bottom.macwatt wrote:Thanks for the reply do you know the measurements of your bar outside to outside at hoods and drops? my 400mm Aerofly 2 is 420mm across the hoods and just under 430mm at the drops with tape installed. The reason I ask is I want to be sure going one size down will be sufficient.
See dimension W1,W2. It's still center-center, but you can see that the bars have a constant width everywhere
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com