2020 Specialized Tarmac SL7

[Vuong05]

The transition part between stem and spacers is different. The rest is the same

Not in my experience. My SL7 came with a 6 deg. S-Works Tarmac SL7 stem, and I swapped it to a 12 deg. S-Works Tarmac SL7 stem without changing any other parts - same top cover, spacers and transition.

Same for me, switched from a 6 deg. to 12 deg. SL7 stem, without changing any other parts.

[Maddie]

Ah, it's possible that I mix this up with my Venge. Sorry

[eins4eins]

perfect, thanks guys.

[Jaisen]

Hi all,
I'm waiting for my new SL7 Expert to arrive and I'm looking to buy an aero handlebar and there's currently no stock for the Roval Rapide. On the Seka website they mentionned that their integrated handlebar is compatible with the SL7 but I've never seen anyone running this. There's not much info on this but wanted to know is somone already tried and what it looked like?

Thanks!

I'd go with a Pro Vibe Aero SL and make it look just like a Remco's setup. I've got this handlebar and it's superb.

I also have this bar and can confirm it is very comfortable and stiff. Highly recommend.

[macwatt]

Hi

Looking for help for aero bar for my Tarmac SL7. I currently have Aerofly 2 in a 40cm which I feel is slightly too wide I have been searching found a few below would appreciate any advice or recommendations which are fully compatible. I would require 36-38cm centre to centre bar with similar reach of Aerofly 2 which I think is 80mm

Thanks


https://www.singletrackbikes.co.uk/m7b0 ... ars_-_Drop

https://ogevkinbike.com/collections/han ... dlebar-eu-

https://www.wiggle.co.uk/prime-primaver ... -handlebar

https://www.santafixie.co.uk/pro-plt-ca ... black.html

Regards

James

[marian]

And what about Pro Vibe Aero SL ? Also available in a width of 38 cm (C-C) with a reach of 80 mm I have 42 cm, satisfied

[macwatt]

And what about Pro Vibe Aero SL ? Also available in a width of 38 cm (C-C) with a reach of 80 mm I have 42 cm, satisfied

Thanks for the reply do you know the measurements of your bar outside to outside at hoods and drops? my 400mm Aerofly 2 is 420mm across the hoods and just under 430mm at the drops with tape installed. The reason I ask is I want to be sure going one size down will be sufficient.

[GONE4ARIDE]

And what about Pro Vibe Aero SL ? Also available in a width of 38 cm (C-C) with a reach of 80 mm I have 42 cm, satisfied

Great suggestion. I have a 40cm on my S-Works Tarmac SL6 and I love it. Good luck finding one though.

[ODC]

And what about Pro Vibe Aero SL ? Also available in a width of 38 cm (C-C) with a reach of 80 mm I have 42 cm, satisfied

Great suggestion. I have a 40cm on my S-Works Tarmac SL6 and I love it. Good luck finding one though.

In europe enough stock of this handlebar.

[GONE4ARIDE]

And what about Pro Vibe Aero SL ? Also available in a width of 38 cm (C-C) with a reach of 80 mm I have 42 cm, satisfied

Great suggestion. I have a 40cm on my S-Works Tarmac SL6 and I love it. Good luck finding one though.

In europe enough stock of this handlebar.

You are fortunate. Availabililty of Pro components here in the USA has been virtually non-existent for the past 12-18 months.

[marian]

terrible, I bought them last september. Maybe luck, they arrived within a week of ordering in lbs

[macwatt]

Thanks

I have ordered Pro Vibe Aero SL 380mm

If anyone is interested in Specialized Aerofly 2 400mm it's in very good condition only reason for selling is the width please let me know.

[marian]

And what about Pro Vibe Aero SL ? Also available in a width of 38 cm (C-C) with a reach of 80 mm I have 42 cm, satisfied

Thanks for the reply do you know the measurements of your bar outside to outside at hoods and drops? my 400mm Aerofly 2 is 420mm across the hoods and just under 430mm at the drops with tape installed. The reason I ask is I want to be sure going one size down will be sufficient.

at hoods 44 cm , same on the bottom.

See dimension W1,W2. It's still center-center, but you can see that the bars have a constant width everywhere

[macwatt]

Forgot to ask does Specialized Computer Mount work with the Pro Vibe Aero SL?

[Jaisen]

Forgot to ask does Specialized Computer Mount work with the Pro Vibe Aero SL?

The out front computer mount attaches to the stem cap so yes it'll be fine with any bar.