Question for Enve SES Aero Road Bar owners

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

endershan
Posts: 87
Joined: Thu Jul 14, 2016 3:56 am

by endershan

bambinhyung wrote:
endershan wrote:I use this stem mount from Fouriers.
http://www.fouriers-bike.com/en/pro.php ... cid=28&f=5


Looks really good! Do you think that mount would work with an Enve stem?


It will work fine with Enve stem, but what @danridesbikes proposed above is a much neater solution! With Fouriers mount you can only have the computer way above the handlebar, Enve gives you more option.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



bambinhyung
Posts: 4
Joined: Tue Oct 04, 2016 5:16 pm

by bambinhyung

danridesbikes wrote:do you have an Enve stem?

http://www.elitecustom.sg/products/quad ... 2513829827


Yes I do. Thanks for the link!

But they're unfortunately sold out... :(

Do you know of any other mounts like that out there? That are compatible with Enve stems?

danridesbikes
Posts: 101
Joined: Wed Feb 24, 2010 8:27 pm

by danridesbikes

all they have done is fix one of these to the underside of the ENVE mount

you just need to drill and tap the cross beam underneath, and they say they used epoxy in there as well, i guess as a belt and braces approach

http://www.twohubs.com/PortalDocs/170/E ... unt-04.jpg

http://www.tweekscycles.com/Product.do? ... oCi_Hw_wcB

bambinhyung
Posts: 4
Joined: Tue Oct 04, 2016 5:16 pm

by bambinhyung

Thanks a lot for the tips guys!

So here the update for my setup with my front light attached to the custom ENVE computer mount.

Image

ENVE Custom Garmin & GoPro Mount: http://www.elitecustom.sg/products/quad ... 2513829827 (Thanks for the link danridesbikes)
Cateye Light GoPro Mount: http://www.rec-mounts.com/products/adapter/gp-cathl2/

User avatar
Fixie82
Posts: 348
Joined: Mon Mar 18, 2013 3:45 am

by Fixie82

Realise this was mostly around computer and light mounts but wanted to ask if anyone here is running the Enve SES Aero bars with a wide clamp stem such as the Pro Sprint? I've seen a few set ups with a Zipp Sprint stem but not the Pro.

I'm keen on trying out the Enve bars but not so keen if they don't fit. I have a computer mount that attaches via the stem bolts so space to run accessories on the bar is not an issue.

Would be grateful if anyone can chime in with some information.

Bullet
Posts: 21
Joined: Fri Jan 27, 2017 10:28 am

by Bullet

Ive just ordered this one, hopefully it works out well.

https://www.rec-mounts.com/products/enve/garmin-combo/

Image

hongsj
Posts: 27
Joined: Sat Dec 24, 2016 10:47 am

by hongsj

If you have a garmin edge 1000, use envy computer mount V2.

User avatar
Kurt1980
Posts: 319
Joined: Mon Oct 26, 2020 9:41 am

by Kurt1980

Anyone have a lead for a Garmin mount for the bar with a Ritchey Chicane B2 stem? The bolts are on a 45 degree angle, and thread in from the back. Not a lot of real estate at the 31.8mm section of the bar.

Photos attached. TIA!
Attachments
Screenshot_20230426_211502_Gallery.jpg
Screenshot_20230426_211450_Gallery.jpg

User avatar
Kurt1980
Posts: 319
Joined: Mon Oct 26, 2020 9:41 am

by Kurt1980

Follow up question...
Has anyone run these bars with AXS rim brake shifters with internal housing through the bar? AXS shifters have only 1 dedicated guide for the housing in the body of the hood. This guide leads to the inside of the bar. It's going to be a very tight fit for the housing to get around the corner and travel the length of the bar.

SRAM Red 22 had 2 options, inside and outside of the bar.

Photos below for reference.
Edit - added a 3rd picture.
20230529_215945.jpg
20230529_215821.jpg
Screenshot_20230529_234125_Gallery.jpg

Post Reply