What does the inside of the Cube hanger look like? There seems to be two very similar hangers and I'm wondering which is correct for the 168. In the link below you can see the differences. One is straight on the front edge and the other has a little notch. I think the notched one is the correct version but wanted to see if yours had the notch.Edopizzo wrote: ↑Fri Sep 23, 2022 9:45 pmhttps://imgur.com/gallery/4m84EVOEdopizzo wrote: ↑Mon Aug 22, 2022 6:42 pmHello! Has anyone ever found a direct mount derailleur hanger for the Velobuild vbr-099? This is the standard one https://photos.app.goo.gl/ab6ruSXSJzd3GxQd8
Edit: I've read a few posts back and it's the same hanger as the vbr-168. I've also read the concern of the axle thread being on the inner part and I think it's somewhat dangerous.
I saw some pictures of Cube direct mount hangers and I think they look quite similar to ours, however the thread is on the outer cap which would be better. I have one friend who has a Cube so I'll ask him to try to fit his dm hanger
Well I tried and it works perfectly! The onlt problem is that Cube hangers have a 1mm thread pitch, while the axle is 1.5mm. Cube axles use the Syntace standard so the non drive side is wedge shaped as opposed to the more common flat with ridges so it's not possible to use a Cube axle on our bikes. I have to find a proper axle then
https://www.aliexpress.us/item/32568016 ... _shipto=US