Farsports F1 Integrated Handlebar/Stem

[lukaszzsch]

F1s and 1040. There is plenty of space between them. >>5 mm


Wysłane z iPad za pomocą Tapatalk

[Agent041]

F1s and 1040. There is plenty of space between them. >>5 mm

Do you have any problems when pressing the Lap button?

[KarlGLS]

Does the F1s comes with 1”1/8 steerer spacer or is there 2 different cockpit options?


Sent from my iPhone using Tapatalk

[lukaszzsch]

Yes, it comes with appropriate spacer


Wysłane z iPad za pomocą Tapatalk

[Agent041]

Finally upgrade time

[warthog101]

Looks good!

[KarlGLS]

What’s the actual difference between the f1s and f1x ?


Sent from my iPhone using Tapatalk

[eddymurks]

Is anyone running the F1X on a supersix evo?

[Agent041]

What’s the actual difference between the f1s and f1x ?

Never model. Lighter, better looking

[mrlobber]

The F1x size of 360mm (and any other, of course, too) is measured at the tops or the drops?

[TT02]

The F1x size of 360mm (and any other, of course, too) is measured at the tops or the drops?

The F1x has the same specs like the F1s, so the 360mm is measured at the tops (center to center). The size at the drops is 380mm.

[Marusca]

Hey guys,
I recently got the f1x installed on a 2024 propel, and the mechanic set the stem bolt torque at 6nm (as per specs).
The thing is, it seems like the bolts are coming slightly loose overtime; i checked with my torque wrench, which might be not as accurate as his, but is it an issue as long as there's not play in the headset?

[Agent041]

Hey guys,
I recently got the f1x installed on a 2024 propel, and the mechanic set the stem bolt torque at 6nm (as per specs).
The thing is, it seems like the bolts are coming slightly loose overtime; i checked with my torque wrench, which might be not as accurate as his, but is it an issue as long as there's not play in the headset?

Interesting, I have also F1x, and as I did not know how much to tighten, I opted for less then more, just to be on the safe side, so have tighten to 4Nm, and I have no problems with coming loose.

I assume it would not be an issue, but would check the tightness from time to time.

[warickwrx]

Hey guys,
I recently got the f1x installed on a 2024 propel, and the mechanic set the stem bolt torque at 6nm (as per specs).
The thing is, it seems like the bolts are coming slightly loose overtime; i checked with my torque wrench, which might be not as accurate as his, but is it an issue as long as there's not play in the headset?

You could just apply some thread locker onto the bolts. It should solve the issue.

[peekeesh]

How's your 1050 now after using it for a few months? I just got the F1x and when I tried putting on the 1050 (w/o silicone case), it rubs. Currently trying to make a 3d printed mount for additional clearance.

Hi,

I’ve got F1s bar with stock garmin holder.
1050 fits perfectly but there is no space for using silicon case or something like that. You must install garmin computer naked
Overall is looks very well matched imho.






Wysłane z iPad za pomocą Tapatalk