Page 74 of 80

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Mon Jan 16, 2023 5:20 pm
by wannabefast
WheresWaldo wrote:
Sun Jan 15, 2023 3:11 pm
CrankAddictsRich wrote:
Sun Jan 15, 2023 1:13 pm
WheresWaldo wrote:
Fri Sep 03, 2021 10:41 pm
If you ever wanted to mount your Varia sideways, I built this mount for someone. I have permission to report the images here.
This is exactly how I want to mount my Varia.... did you ever post this model for sale? I could not find it on Shapeways.
Yep, it is here;
http://shpws.me/SMi8n or this link; https://www.shapeways.com/product/LPX35 ... unt-insert
That looks great! Wish it was available when I ordered my Varia mount, the horizontal orientation is so much tidier than vertical.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 1:54 pm
by CrankAddictsRich
wannabefast wrote:
Mon Jan 16, 2023 5:20 pm
WheresWaldo wrote:
Sun Jan 15, 2023 3:11 pm
CrankAddictsRich wrote:
Sun Jan 15, 2023 1:13 pm
WheresWaldo wrote:
Fri Sep 03, 2021 10:41 pm
If you ever wanted to mount your Varia sideways, I built this mount for someone. I have permission to report the images here.
This is exactly how I want to mount my Varia.... did you ever post this model for sale? I could not find it on Shapeways.
Yep, it is here;
http://shpws.me/SMi8n or this link; https://www.shapeways.com/product/LPX35 ... unt-insert
That looks great! Wish it was available when I ordered my Varia mount, the horizontal orientation is so much tidier than vertical.
you don't have to wish... you can order it now.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 1:54 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 4:43 pm
by tenja
WheresWaldo - Please contact me. Need to order another canted SWAT varia mount and can't PM direct now. Not sure why, but can't reply to you on PM. Want to order the exact same as before for new bike.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 5:52 pm
by WheresWaldo
tenja wrote:
Tue Jan 17, 2023 4:43 pm
WheresWaldo - Please contact me. Need to order another canted SWAT varia mount and can't PM direct now. Not sure why, but can't reply to you on PM. Want to order the exact same as before for new bike.
PM Sent

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 5:55 pm
by tenja
WheresWaldo wrote:
Tue Jan 17, 2023 5:52 pm
tenja wrote:
Tue Jan 17, 2023 4:43 pm
WheresWaldo - Please contact me. Need to order another canted SWAT varia mount and can't PM direct now. Not sure why, but can't reply to you on PM. Want to order the exact same as before for new bike.
PM Sent
WheresWaldo - I can't reply to PMs due to post count now. I need the Canted SWAT Varia Mount in Large size with the airtag on the front. It works great. No issues. You previously sent me a private link to order. Want to do the same. The prior link is dead now.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 6:04 pm
by WheresWaldo
tenja wrote:
Tue Jan 17, 2023 5:55 pm
WheresWaldo wrote:
Tue Jan 17, 2023 5:52 pm
tenja wrote:
Tue Jan 17, 2023 4:43 pm
WheresWaldo - Please contact me. Need to order another canted SWAT varia mount and can't PM direct now. Not sure why, but can't reply to you on PM. Want to order the exact same as before for new bike.
PM Sent
WheresWaldo - I can't reply to PMs due to post count now. I need the Canted SWAT Varia Mount in Large size with the airtag on the front. It works great. No issues. You previously sent me a private link to order. Want to do the same. The prior link is dead now.
http://shpws.me/T6of or https://www.shapeways.com/product/U88RL3SNN

I remember the convo now, I disabled the link because somehow I thought you would let me know if it worked. But since you are wanting another I am going to assume that it does work.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 6:24 pm
by tenja
awesome! Thanks. Ordered. Yes - confirmed it has worked perfect since April.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 6:49 pm
by renoracing
I think I'm up to 12 pieces ordered from @WheresWaldo's Shapeways page and thrilled wiht each of them. I used to run seatpost mounted Varias, including some custom ones that he was able to design for me. Since switching to S-works saddles, I now have four of the Canted Swat Varia Mounts on my bikes and love them. They work really well even with my Lezyne Road Caddy saddle bags, for a really sleek setup, and Shapeways prints are far superior to just about every other 3D printed part I've purchased elsewhere.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Tue Jan 17, 2023 7:23 pm
by WheresWaldo
renoracing wrote:
Tue Jan 17, 2023 6:49 pm
I think I'm up to 12 pieces ordered from @WheresWaldo's Shapeways page and thrilled wiht each of them. I used to run seatpost mounted Varias, including some custom ones that he was able to design for me. Since switching to S-works saddles, I now have four of the Canted Swat Varia Mounts on my bikes and love them. They work really well even with my Lezyne Road Caddy saddle bags, for a really sleek setup, and Shapeways prints are far superior to just about every other 3D printed part I've purchased elsewhere.
Thanks for the kind words. This is why I do this. I love cycling and want to give back to the community. Cycling saved my life and it is very important to me that others get the same joy out of cycling that I have. If I can contribute in a small way, I am happy.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 4:05 pm
by bsharp77
Hi all,

Looking for someone that can design a downtube mounting plate for my 2021 Giant TCR SL frameset to incorporate a Di2 bar end junction box.
I'm building up the frameset at the minute and trying to make everything as integrated and streamlined as I can.

The hole will just about take a junction box ok (some slight shaving off some of the plastic to make it fit in the cavity snugly).
This has been successfully done by CCC Pro Team - they seem to have made their own mount, but it is not available anywhere either physically or as a design file.

Image

Is there anyone here that could have a go at making one of these?!
I can take measurements and photos of both the cavity and the standard blanking plate if it helps at all.

There is another photo of someone who seems to have just cut a hole into the blanking plate and put the junction in there - not as sleek, but still functional I suppose.

Image
Willing to work with someone to get this part right even if it takes a couple of attempts as i'd really love to perfect this little mod.

Any help very much appreciated.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 4:31 pm
by WheresWaldo
bsharp77 wrote:
Wed Jan 18, 2023 4:05 pm
Hi all,

Looking for someone that can design a downtube mounting plate for my 2021 Giant TCR SL frameset to incorporate a Di2 bar end junction box.
I'm building up the frameset at the minute and trying to make everything as integrated and streamlined as I can.

The hole will just about take a junction box ok (some slight shaving off some of the plastic to make it fit in the cavity snugly).
This has been successfully done by CCC Pro Team - they seem to have made their own mount, but it is not available anywhere either physically or as a design file.
This looks like the stopper plate replacement, would it be easier to buy a second plate and then drill a hole for the Junction Box?
https://www.giantbikespares.com/Giant-T ... il/3-46647
https://www.bike24.com/p2564055.html

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 4:41 pm
by bsharp77
WheresWaldo wrote:
Wed Jan 18, 2023 4:31 pm
bsharp77 wrote:
Wed Jan 18, 2023 4:05 pm
Hi all,

Looking for someone that can design a downtube mounting plate for my 2021 Giant TCR SL frameset to incorporate a Di2 bar end junction box.
I'm building up the frameset at the minute and trying to make everything as integrated and streamlined as I can.

The hole will just about take a junction box ok (some slight shaving off some of the plastic to make it fit in the cavity snugly).
This has been successfully done by CCC Pro Team - they seem to have made their own mount, but it is not available anywhere either physically or as a design file.
This looks like the stopper plate replacement, would it be easier to buy a second plate and then drill a hole for the Junction Box?
https://www.giantbikespares.com/Giant-T ... il/3-46647
https://www.bike24.com/p2564055.html

Hi Waldo,

Thats what appears to have been done in the second photo above.
I have a couple of blanking plates on order from Giant Bike Spares, but they are backordered for 2-3 weeks.

However it wouldnt be anywhere near as clean as the mount as shown in the first photo.
They have created a deeper mount, raised up from the frame which allows for the junction box to be sunk properly into the faceplate and creates a much better streamlined finish. The original Giant blanking plate is very thin and wouldnt allow any kind of finish like this (as is apparent from the second photo as the junction box sits "on top" of the blanking plate with the hole drilled into it).

If theres any magic you think you could work on this please do let me know - i'd be happy to send a blanking plate and a scaled photo showing the opening on the frame.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 5:16 pm
by WheresWaldo
@bsharp77

I would have no issues buying a blanking plate, but for some reason Giant has very little presence in the U.S., especially in my part of the mid-atlantic states. I have one Giant dealer about an hour away from me and I would venture a guess, that I would have just as long or maybe a longer backorder time getting the plate from them.

I called the local dealer and they are checking with their Giant rep to see if the part is available in the U.S. I probably won't have an answer until tomorrow.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 5:31 pm
by bsharp77
WheresWaldo wrote:
Wed Jan 18, 2023 5:16 pm
@bsharp77

I would have no issues buying a blanking plate, but for some reason Giant has very little presence in the U.S., especially in my part of the mid-atlantic states. I have one Giant dealer about an hour away from me and I would venture a guess, that I would have just as long or maybe a longer backorder time getting the plate from them.
Would scale photos of the blanking plate and the cavity position on the frame be enough for you to have a go?
I imagine it's not the shape that will present the problem, but rather aligning the hole to match exactly.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 5:31 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Jan 18, 2023 5:51 pm
by WheresWaldo
bsharp77 wrote:
Wed Jan 18, 2023 5:31 pm
WheresWaldo wrote:
Wed Jan 18, 2023 5:16 pm
@bsharp77

I would have no issues buying a blanking plate, but for some reason Giant has very little presence in the U.S., especially in my part of the mid-atlantic states. I have one Giant dealer about an hour away from me and I would venture a guess, that I would have just as long or maybe a longer backorder time getting the plate from them.
Would scale photos of the blanking plate and the cavity position on the frame be enough for you to have a go?
I imagine it's not the shape that will present the problem, but rather aligning the hole to match exactly.
I called the local dealer, they are contacting their Giant rep to see if the part is available in the U.S. I might have an answer by tomorrow. With the cover in hand I can see what structure Giant placed on the back side of the cover and what I might need to work around. It would be easier if it was in my hands. We will see if that is possible. I will likely still need photos, to see what it looks like in the hole/downtube.