Page 72 of 80

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Mon Sep 26, 2022 12:49 pm
by WheresWaldo
Pioneer Power Meter Battery Cover Shortened link (may not work 100% of the time)
Pioneer Power Meter Battery Cover Full URL

I have been told these are nearly impossible to find, even used.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Mon Sep 26, 2022 12:49 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Camera Mounts and Assorted 3D Printed Parts

Posted: Fri Sep 30, 2022 10:27 pm
by garage0racing
WheresWaldo wrote:And, here is my first RCT715 Seat Post Mount Adapter, http://shpws.me/TcYx
It is specifically for the Pinarello Dogma F and provides a secure mount that is not the bulky rubber spacers and O-rings that Garmin provides in the box.
Can you do a similar race number holder for the Dogma F (non #)?

Image


Sent from my iPhone using Tapatalk

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Oct 06, 2022 8:30 pm
by WheresWaldo
garage0racing wrote:
Fri Sep 30, 2022 10:27 pm
Can you do a similar race number holder for the Dogma F (non #)?
Image
Sent from my iPhone using Tapatalk
I haven't forgotten, just been busy.

Here is a mount for SWAT saddles and the Giant TL100-200 tail lights. http://shpws.me/Tg4C (long URL - https://www.shapeways.com/product/Q9L68 ... l200-mount)
Do not choose the material "PA12 Glass Beads" it is stronger but more brittle so not ideal for the vibration that we experience cycling.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Oct 27, 2022 4:52 pm
by BdaGhisallo
Waldo,

Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.

https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Oct 27, 2022 5:03 pm
by WheresWaldo
BdaGhisallo wrote:
Thu Oct 27, 2022 4:52 pm
Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB
If someone would give me the diameter measurement of the body, I would.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Oct 27, 2022 5:27 pm
by BdaGhisallo
WheresWaldo wrote:
Thu Oct 27, 2022 5:03 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 4:52 pm
Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB
If someone would give me the diameter measurement of the body, I would.
As soon as I get mine I will do that, unless someone beats me to it.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Oct 27, 2022 5:28 pm
by BdaGhisallo
BdaGhisallo wrote:
Thu Oct 27, 2022 5:27 pm
WheresWaldo wrote:
Thu Oct 27, 2022 5:03 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 4:52 pm
Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB
If someone would give me the diameter measurement of the body, I would.
The product page lists the diameter as 22mm. I'll check mine when I get it.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Oct 27, 2022 5:55 pm
by WheresWaldo
BdaGhisallo wrote:
Thu Oct 27, 2022 5:28 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 5:27 pm
WheresWaldo wrote:
Thu Oct 27, 2022 5:03 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 4:52 pm
Waldo,
Do you have any plans to make any seat mounts for the new Exposure tail light - the Boost? It's similar to the TraceR but with a thicker body to accomodate a bigger battery.
https://www.exposure-use.com/Brands/Exp ... XPBOOSTRDB
If someone would give me the diameter measurement of the body, I would.
The product page lists the diameter as 22mm. I'll check mine when I get it.
Yeah, but I don't know where they measured it and if it includes those little ears.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Thu Nov 03, 2022 12:11 pm
by WheresWaldo
Sent out by Shapeways yesterday; Customers who spend $125 at my shop, will receive free shipping (including international), throughout the promotional period. You can enter MADBIKEFREESHIP at checkout for free shipping from now until December 31st. Terms and conditions apply*.
Shapeways also has a Holiday Shopping Guide. We are one of the storefronts featured in the guide.
https://www.shapeways.com/shops/revolutionaries Use code MADBIKEFREESHIP
Image
*This free standard shipping promotion is valid through midnight ET on December 31, 2022. This offer includes a coupon code for unlimited uses within the promotional period. The coupon code cannot be combined with any other offer. The coupon code is void if altered, copied, transferred, auctioned, or sold. This offer is valid for items within your specific shop and not valid on prior purchases. This promotion is subject to change without notice.
https://www.shapeways.com/shops/revolutionaries

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Nov 09, 2022 3:36 am
by WheresWaldo
I am on a forced break from designing anything until next week, have to replace a dead PC. Of course it had all my stuff I was working on installed. Good thing Fusion 360 is cloud based, so no design files are lost.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Nov 09, 2022 6:04 pm
by BdaGhisallo
WheresWaldo wrote:
Thu Oct 27, 2022 5:55 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 5:28 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 5:27 pm
WheresWaldo wrote:
Thu Oct 27, 2022 5:03 pm

If someone would give me the diameter measurement of the body, I would.
The product page lists the diameter as 22mm. I'll check mine when I get it.
Yeah, but I don't know where they measured it and if it includes those little ears.
I got mine and I think I'll hold off on offering any measurements. It's not the same shaping as the TraceR and there's a bit of a taper going on.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Wed Nov 09, 2022 6:19 pm
by WheresWaldo
BdaGhisallo wrote:
Wed Nov 09, 2022 6:04 pm
WheresWaldo wrote:
Thu Oct 27, 2022 5:55 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 5:28 pm
BdaGhisallo wrote:
Thu Oct 27, 2022 5:27 pm
The product page lists the diameter as 22mm. I'll check mine when I get it.
Yeah, but I don't know where they measured it and if it includes those little ears.
I got mine and I think I'll hold off on offering any measurements. It's not the same shaping as the TraceR and there's a bit of a taper going on.
No problem, plus I won't be back up and running until Monday or Tuesday.

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Sun Nov 20, 2022 2:13 pm
by WheresWaldo
Here is a mount for the Giant TL200. I don't see much Giant accessories here on the Eastern half of the US, but they appear very popular in the Asian and Australian markets. http://shpws.me/Tg4C

Image
Image
Image

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Sun Dec 18, 2022 5:14 am
by Curious George
Hi Waldo,
Do you have a 27.2mm mount for the Varia 715?
I looked through the store on shapeways and couldn't find one.

Thx in advance

Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Sun Dec 18, 2022 5:14 am
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Camera Mounts and Assorted 3D Printed Parts

Posted: Sun Dec 18, 2022 6:45 am
by WheresWaldo
Curious George wrote:
Sun Dec 18, 2022 5:14 am
Hi Waldo,
Do you have a 27.2mm mount for the Varia 715?
I looked through the store on shapeways and couldn't find one.

Thx in advance
https://www.shapeways.com/product/DEFT2 ... nt-adapter
http://shpws.me/TkH4

Sorry this was sitting in my models for over a month and I totally forgot about it.