How can a wheel like this pass QC?

Wheels, Tires, Tubes, Tubeless, Tubs, Spokes, Hookless, Hubs, and more!

Moderator: robbosmans

Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.

If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
GravelFactor
Posts: 16
Joined: Sun Sep 04, 2022 10:07 pm

by GravelFactor

I have a rear wheel where it was impossible to get a tubeless tire (GP5000) to seal (hooked rim). After inspection, I found that part of the bead was not shaped correctly, see picture.
I have started a warranty case with the seller.

I am shocked that this rim can pass QC and go into wheel production. Have anybody experienced something like this?
IMG_0139.jpeg
[/img]

User avatar
Lelandjt
Posts: 945
Joined: Tue Jan 19, 2016 7:10 am

by Lelandjt

No, and I work at a shop so I see a lot of rims. What is it?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



MagicShite
Posts: 456
Joined: Sun Jun 26, 2016 3:33 pm

by MagicShite

is this an Enve?

fatpinarellorider
Posts: 255
Joined: Wed Mar 01, 2023 5:30 am

by fatpinarellorider

I'm surprised you didn't notice that when you were mounting the tyre.

Jaisen
Posts: 693
Joined: Fri Oct 07, 2022 2:01 am

by Jaisen

Why are you hiding the brand? If it is a big brand name, surely it would be a service to others on the forum to know that brand has poor QC. If it is some ultra cheap aliexpress wheel, then I guess it is to be expected.

User avatar
jdecraene85
Posts: 150
Joined: Wed Dec 02, 2015 1:44 pm
Location: Kluisbergen, Belgium

by jdecraene85

It looks like a very poorly executed construction to make up for the weight of the valve on the other side of the wheel? But it's indeed to close to where the bead is supposed to sit.

EtoDemerzel
Posts: 362
Joined: Sun Dec 17, 2023 4:13 pm

by EtoDemerzel

That looks like it was damaged and sloppy repair

jlok
Posts: 2518
Joined: Tue Jun 30, 2015 3:30 am

by jlok

MagicShite wrote:
Fri May 10, 2024 1:02 pm
is this an Enve?
I thought of the same at first, but judging from the access holes I think it is not Enve.
Rikulau V9 DB Custom < BMC TM02 < Litespeed T1sl Disc < Giant Propel Advanced SL Disc 1 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10

cleanneon98
Posts: 527
Joined: Sun Aug 06, 2023 2:26 pm

by cleanneon98

Don't have to worry about passing QC if you don't do it, is my guess
TREK Madone Gen 7 SLR - 7.5kg
TREK Fuel EX Gen 5 - overbuilt and overweight

mikehhhhhhh
Posts: 468
Joined: Tue May 16, 2023 3:08 pm
Location: UK

by mikehhhhhhh

The state of the finish on that, I'm not surprised.

Cheap chinese wheel?

User avatar
Lelandjt
Posts: 945
Joined: Tue Jan 19, 2016 7:10 am

by Lelandjt

EtoDemerzel wrote:
Fri May 10, 2024 3:29 pm
That looks like it was damaged and sloppy repair
That's a patch where there's a hole in the initial layup to remove the bladder. The patch was installed sloppily.

GravelFactor
Posts: 16
Joined: Sun Sep 04, 2022 10:07 pm

by GravelFactor

Hello everyone,
I just blinded the wheel to avoid a brand bashing. But since it has been guessed, I'll say that the wheel is a new Enve SES 5.6.
I didnt notice the fault because a mechanic mounted the rim tape before I mounted the tire.
To make things worse, the front wheel had two faults: 1) 15 mm end caps were mounted which took a long to get replaced, 2) a large piece of green bladder was left inside the rim. Luckily it flipped so I could pull it out. Otherwise that alone had been a warranty case. Unrelated faults but only possible due to completely inadequate QC. But not compensated for by Enve customer "service".

toxin
Posts: 938
Joined: Tue Apr 18, 2023 5:56 pm

by toxin

mikehhhhhhh wrote:
Fri May 10, 2024 5:10 pm
The state of the finish on that, I'm not surprised.

Cheap chinese wheel?
Lol

Jaisen
Posts: 693
Joined: Fri Oct 07, 2022 2:01 am

by Jaisen

GravelFactor wrote:
Fri May 10, 2024 7:50 pm
Hello everyone,
I just blinded the wheel to avoid a brand bashing. But since it has been guessed, I'll say that the wheel is a new Enve SES 5.6.
I didnt notice the fault because a mechanic mounted the rim tape before I mounted the tire.
To make things worse, the front wheel had two faults: 1) 15 mm end caps were mounted which took a long to get replaced, 2) a large piece of green bladder was left inside the rim. Luckily it flipped so I could pull it out. Otherwise that alone had been a warranty case. Unrelated faults but only possible due to completely inadequate QC. But not compensated for by Enve customer "service".
Thanks for sharing this additional information. This is rather disappointing from Enve, I honestly would have expected much better from the brand.

EtoDemerzel
Posts: 362
Joined: Sun Dec 17, 2023 4:13 pm

by EtoDemerzel

GravelFactor wrote:
Fri May 10, 2024 7:50 pm
But not compensated for by Enve customer "service".
So Enve would not simply replace this wheel? Are you having to fight them on this?

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply