Does anyone know what key is required for truing the DT Swiss ARC 1400 Dicut DB 62 wheels?
As these wheels have internal nipples, a driver for sure is required, but on DT states on their site "DT Pro Lock hidden aluminum" for nipple specification.
As I will need to order the key online and it will take some time for it to arrive (and also will need to replace the tubeless tape), I would like to have all the tools on hand, before I start the procedure.
DT Swiss ARC 1400 Dicut DB 62 nipple key?
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
wheelbuilder
- Posts: 1219
- Joined: Wed Feb 08, 2017 2:10 am
5.5mm nut driver unless they are Squorx which it would probably say.
Never cheer before you know who is winning
Black handled nipple driver -https://www.amazon.com/DT-Swiss-T-Handl ... B00K3PCO6U
Plastic spoke holder - https://www.amazon.com/Park-Tool-Bladed ... hdGY&psc=1 (pliers will work, but you can damage the black finish)
If you need a new spoke, buy a straightpull and then pound it flat with a hammer/vise.
Plastic spoke holder - https://www.amazon.com/Park-Tool-Bladed ... hdGY&psc=1 (pliers will work, but you can damage the black finish)
If you need a new spoke, buy a straightpull and then pound it flat with a hammer/vise.
