[/quote]
Sound is ok , not so loud , had a pair of scribe wheels , they were to loud. Coming Saturday I do a 6 day ride training , so 700 km and 10 000 m climbing incoming , but confident there great
Elite Drive 40D G45 CS road and gravel wheels
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
Pretty sure my weight was with tubeless valve stems installed. Anyways, how was the ride? Like how loud they are?
[/quote]
Sound is ok , not so loud , had a pair of scribe wheels , they were to loud. Coming Saturday I do a 6 day ride training , so 700 km and 10 000 m climbing incoming , but confident there great
[/quote]
Sound is ok , not so loud , had a pair of scribe wheels , they were to loud. Coming Saturday I do a 6 day ride training , so 700 km and 10 000 m climbing incoming , but confident there great
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
-
SixThirteen
- Posts: 224
- Joined: Sat May 24, 2014 11:49 am
For folks still on regular clinchers, what tyres are you running?
On my 40Ds I've got a Spesh Turbo Gripton SWorks 24 on the front. Went on really easily and meets the 105% rule. On the rear same tyre in a 26
On my 40Ds I've got a Spesh Turbo Gripton SWorks 24 on the front. Went on really easily and meets the 105% rule. On the rear same tyre in a 26
Scott Foil RC10 Ultegra 12 speed / Creston 50 - 7.9Kg
I got gp5000s in 32mm clinchers with ridenow tpu tubes.SixThirteen wrote: ↑Mon Jan 22, 2024 10:49 pmFor folks still on regular clinchers, what tyres are you running?
On my 40Ds I've got a Spesh Turbo Gripton SWorks 24 on the front. Went on really easily and meets the 105% rule. On the rear same tyre in a 26
I got hunt wheels and thought those hubs were loud compared to 2 sets of dt swiss wheels. Then I got the drive 40s and was impressed with the sound.
Best of luck if you order from them. They shipped me the wrong wheels, admitted it, then told me I needed to wait until after the new year (Feb 4 - Feb 18) and I'm still waiting, they keep telling me they "need more days", they're waiting for the person who got "my" wheels to receive them. They suck - back to farsports.
Speedplay is the devil!
-
stevesbike
- Posts: 330
- Joined: Thu Oct 24, 2019 5:33 pm
I rode the drive 40v rim brake version of these for the Haute Route Alps a couple of years ago and they performed well - so virtually every major col in the Alps up and down. I also have the BWT series rim brake for daily riding - not sure what happened to that series - it was their wave version. Not very light but not expensive and a very stiff wheelset.
-
wheelbuilder
- Posts: 1219
- Joined: Wed Feb 08, 2017 2:10 am
Photos check out. Drive side on ground, small rings, spacer stacks, short stems, flat pedals.
Never cheer before you know who is winning
Got any pics of the full dogma with those wheels?
