Wheels, Tires, Tubes, Tubeless, Tubs, Spokes, Hookless, Hubs, and more!
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
-
Mcdeez
- Posts: 368
- Joined: Fri Nov 27, 2020 3:40 pm
by Mcdeez on Thu Mar 23, 2023 4:43 pm
C36 wrote:Mcdeez wrote: ↑Thu Mar 23, 2023 2:14 pm
C36 wrote:Mcdeez wrote:Anyone tried 30c tire on the hyper 50s 1rst gen?
What's the meaurement mounted on the wheel and does it looks like a bubble?
Sent from my Pixel 6 Pro using Tapatalk
All depend the tire you install.
My 25mm gp5k were already 27+
My 23mm Cup are 25.3
But yes a 30mm tire (so around 31-33 real) will look like a bubble on a 26.5mm wide rim
Ok, im at 28c right now, im gonna keep it like that, love then
Sent from my Pixel 6 Pro using Tapatalk
The questions is "what are you looking for"? you may have valid reasons to go 30 or to revert to 25mm labeled tires... all depends what you want...
Its for my all around bike, i clim and do long milles with one,since theres lots if pot hiles in my area more for comfort and aero ish, right in between.
Sent from my Pixel 6 Pro using Tapatalk
-
Zorka
- Posts: 119
- Joined: Fri Oct 05, 2018 9:20 am
by Zorka on Mon Apr 03, 2023 3:26 pm
What tool do you use for centering the Hyper (2020) wheels with carbon spokes?
On my first ride I hit some potholes and the front wheel is not 100% true anymore. Not too bad, only maybe 0.5mm side to side movement.
-
Mcdeez
- Posts: 368
- Joined: Fri Nov 27, 2020 3:40 pm
by Mcdeez on Mon Apr 17, 2023 11:50 pm
Zorka wrote:What tool do you use for centering the Hyper (2020) wheels with carbon spokes?
On my first ride I hit some potholes and the front wheel is not 100% true anymore. Not too bad, only maybe 0.5mm side to side movement.
Wheeltrue stand
Sent from my Pixel 6 Pro using Tapatalk
-
Mcdeez
- Posts: 368
- Joined: Fri Nov 27, 2020 3:40 pm
by Mcdeez on Mon Apr 17, 2023 11:52 pm
Hi everyone, i have to replace my bearings on the front wheel
I have a Disc Hyper 2021 wheelset, what part number is for the bearing?( Not ceramic, just regular)
The rim brake is not the same size
Sent from my Pixel 6 Pro using Tapatalk
-
Ronin416
- Posts: 405
- Joined: Mon Aug 27, 2012 5:46 pm
by Ronin416 on Wed Apr 19, 2023 4:10 am
Mcdeez wrote:Hi everyone, i have to replace my bearings on the front wheel
I have a Disc Hyper 2021 wheelset, what part number is for the bearing?( Not ceramic, just regular)
The rim brake is not the same size
Sent from my Pixel 6 Pro using Tapatalk
I believe it’s 6803
Sent from my iPhone using Tapatalk
-
Zorka
- Posts: 119
- Joined: Fri Oct 05, 2018 9:20 am
by Zorka on Wed Apr 19, 2023 2:15 pm
Mcdeez wrote: ↑Mon Apr 17, 2023 11:50 pm
Zorka wrote:What tool do you use for centering the Hyper (2020) wheels with carbon spokes?
On my first ride I hit some potholes and the front wheel is not 100% true anymore. Not too bad, only maybe 0.5mm side to side movement.
Wheeltrue stand
Sent from my Pixel 6 Pro using Tapatalk
Wow. I´d like to see how you trued Hypers using wheelstand as a tool.
-
Mcdeez
- Posts: 368
- Joined: Fri Nov 27, 2020 3:40 pm
by Mcdeez on Wed Apr 19, 2023 8:44 pm
Ronin416 wrote:Mcdeez wrote:Hi everyone, i have to replace my bearings on the front wheel
I have a Disc Hyper 2021 wheelset, what part number is for the bearing?( Not ceramic, just regular)
The rim brake is not the same size
Sent from my Pixel 6 Pro using Tapatalk
I believe it’s 6803
Sent from my iPhone using Tapatalk
I got the 6803 and the dont fit, it's for the Rim brake model i believe.
Sent from my Pixel 6 Pro using Tapatalk
-
Ronin416
- Posts: 405
- Joined: Mon Aug 27, 2012 5:46 pm
by Ronin416 on Thu Apr 20, 2023 2:25 am
Zorka wrote:Mcdeez wrote: ↑Mon Apr 17, 2023 11:50 pm
Zorka wrote:What tool do you use for centering the Hyper (2020) wheels with carbon spokes?
On my first ride I hit some potholes and the front wheel is not 100% true anymore. Not too bad, only maybe 0.5mm side to side movement.
Wheeltrue stand
Sent from my Pixel 6 Pro using Tapatalk
Wow. I´d like to see how you trued Hypers using wheelstand as a tool.
No difference than re-truing any other wheel, just have to adjust it like an internal nipple and hold the outside nipple with spoke key and tension from under the rim tape.
Sent from my iPhone using Tapatalk
-
SixThirteen
- Posts: 224
- Joined: Sat May 24, 2014 11:49 am
by SixThirteen on Thu Apr 20, 2023 8:30 am
Mcdeez wrote: ↑Thu Mar 23, 2023 12:18 pm
Anyone tried 30c tire on the hyper 50s 1rst gen?
What's the meaurement mounted on the wheel and does it looks like a bubble?
Sent from my Pixel 6 Pro using Tapatalk
I got a Conti 4000 SII in 28mm and on the Hyper 38 first gen and it blew up to 32mm and wouldn't fit inside my DA rim brake calipers
YMMV as they say
Scott Foil RC10 Ultegra 12 speed / Creston 50 - 7.9Kg
-
Zorka
- Posts: 119
- Joined: Fri Oct 05, 2018 9:20 am
by Zorka on Thu Apr 20, 2023 3:25 pm
Ronin416 wrote: ↑Thu Apr 20, 2023 2:25 am
Zorka wrote:Mcdeez wrote: ↑Mon Apr 17, 2023 11:50 pm
Zorka wrote:What tool do you use for centering the Hyper (2020) wheels with carbon spokes?
On my first ride I hit some potholes and the front wheel is not 100% true anymore. Not too bad, only maybe 0.5mm side to side movement.
Wheeltrue stand
Sent from my Pixel 6 Pro using Tapatalk
Wow. I´d like to see how you trued Hypers using wheelstand as a tool.
No difference than re-truing any other wheel, just have to adjust it like an internal nipple and hold the outside nipple with spoke key and tension from under the rim tape.
Sent from my iPhone using Tapatalk
Thank you. Any idea which tool I´d need to get? There are many types and sizes.
-
Ronin416
- Posts: 405
- Joined: Mon Aug 27, 2012 5:46 pm
by Ronin416 on Thu Apr 20, 2023 8:54 pm
Zorka wrote:Ronin416 wrote: ↑Thu Apr 20, 2023 2:25 am
Zorka wrote:Mcdeez wrote: ↑Mon Apr 17, 2023 11:50 pm
Wheeltrue stand
Sent from my Pixel 6 Pro using Tapatalk
Wow. I´d like to see how you trued Hypers using wheelstand as a tool.
No difference than re-truing any other wheel, just have to adjust it like an internal nipple and hold the outside nipple with spoke key and tension from under the rim tape.
Sent from my iPhone using Tapatalk
Thank you. Any idea which tool I´d need to get? There are many types and sizes.
Should be all here
https://youtu.be/UVzACwu9-YM
Sent from my iPhone using Tapatalk
-
AgentScully
- Posts: 16
- Joined: Tue Apr 06, 2021 3:27 am
by AgentScully on Fri Apr 21, 2023 11:32 am
Anyone running the new hypers? Contemplating between the 35mm and the mid section with a 46 front 54 rear. Still pretty light at around 1300gm for a mid/deep section wheel.
Merida Scultura 4000 rim