Making the transition to tubulars
Moderator: robbosmans
Forum rules
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
The spirit of this board is to compile and organize wheels and tires related discussions.
If a new wheel tech is released, (say for example, TPU tubes, a brand new tire, or a new rim standard), feel free to start the discussion in the popular "Road". Your topic will eventually be moved here!
-
- Posts: 279
- Joined: Tue Apr 13, 2021 3:00 am
I am about to do my first ever transition to Tubulars, but don't want to look like an idiot ungluing/gluing tubulars on a side of the road in case of a puncture.
Is Conti Sprinter Gatorskin sounds like a good solution to you?
Also, if I use tape will changing tubulars become easier?
Is Conti Sprinter Gatorskin sounds like a good solution to you?
Also, if I use tape will changing tubulars become easier?
2018 Cannondale SuperSix EVO 2 rim size 56 (raw stripped) 6.8kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
With tape it is a lot easier.
I have used Gatorskin; it is a very harsh tubular. In wouldn't recommend it. My experience with dealing latex tubulars has been very good. Also, 25 mm require a bit less pressure than 23mm, sealing better.
I have used Gatorskin; it is a very harsh tubular. In wouldn't recommend it. My experience with dealing latex tubulars has been very good. Also, 25 mm require a bit less pressure than 23mm, sealing better.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Any new tubular tires incoming 2022 TdF?
Rikulau V9 DB Custom < BMC TM02 < Litespeed T1sl Disc < Giant Propel Advanced SL Disc 1 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10
nvm, couldn't wait any longer and got Challenge Strada Ultra 27mm. Lovely tires!
Rikulau V9 DB Custom < BMC TM02 < Litespeed T1sl Disc < Giant Propel Advanced SL Disc 1 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10
-
- Posts: 279
- Joined: Tue Apr 13, 2021 3:00 am
Finally decided to make transition to tubulars, and pulled a trigger on used 2017 Zipp 202 tubulars (latest generation), in great condition for little above 400usd.
About tires, what could you say about Conti Force Comp tubulars front and rear?
That is what glued at the moment.
About tires, what could you say about Conti Force Comp tubulars front and rear?
That is what glued at the moment.
Last edited by charirider on Tue Jul 19, 2022 4:27 am, edited 2 times in total.
2018 Cannondale SuperSix EVO 2 rim size 56 (raw stripped) 6.8kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
-
- Posts: 279
- Joined: Tue Apr 13, 2021 3:00 am
-
- Posts: 279
- Joined: Tue Apr 13, 2021 3:00 am
Here is my first tubular setup.
Got theese 2016-2018 era Zipp 202s with Zipp skewers, valve extenders and Conti Force Comp tires with plenty of life left, glued in for 400usd. Cleaned, serviced freehub and it came out a one gorgeous wheelset I might say! No scratches, very little lateral runout, bearings are smooth, even stickers are looking almost mint! Will run these with Zipp Platinum brake pads.
Now the question is: what sealant to use for this butyl inner tubes?
Got theese 2016-2018 era Zipp 202s with Zipp skewers, valve extenders and Conti Force Comp tires with plenty of life left, glued in for 400usd. Cleaned, serviced freehub and it came out a one gorgeous wheelset I might say! No scratches, very little lateral runout, bearings are smooth, even stickers are looking almost mint! Will run these with Zipp Platinum brake pads.
Now the question is: what sealant to use for this butyl inner tubes?
Last edited by charirider on Mon Aug 01, 2022 3:03 am, edited 1 time in total.
2018 Cannondale SuperSix EVO 2 rim size 56 (raw stripped) 6.8kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
I trust Orange Seal. It works on my Corsa Control with latex tube. Other people also have positive exp with it.charirider wrote: ↑Wed Jul 27, 2022 1:08 amHere is my first tubular setup.
Got theese 2016-2018 era Zipp 202s with Zipp skewers, valve extenders and Conti Force Comp tires with plenty of life left, glued in for 400usd. Cleaned, serviced freehub and it came out a one gorgeous wheelset I might say! No scratches, very little lateral runout, bearings are smooth, even stickers are looking almost mint! Will run these with Zipp Platinum brake pads.
Now the question is: what sealant to use for this butyl inner tubes?
viewtopic.php?f=3&t=135991&p=1708718#p1708718
Rikulau V9 DB Custom < BMC TM02 < Litespeed T1sl Disc < Giant Propel Advanced SL Disc 1 < Propel Adv < TCR Adv SL Disc < KTM Revelator Sky < CAAD 12 Disc < Domane S Disc < Alize < CAAD 10
-
- Posts: 279
- Joined: Tue Apr 13, 2021 3:00 am
Thank you! Will order this.jlok wrote: ↑Wed Jul 27, 2022 1:42 amI trust Orange Seal. It works on my Corsa Control with latex tube. Other people also have positive exp with it.charirider wrote: ↑Wed Jul 27, 2022 1:08 amHere is my first tubular setup.
Got theese 2016-2018 era Zipp 202s with Zipp skewers, valve extenders and Conti Force Comp tires with plenty of life left, glued in for 400usd. Cleaned, serviced freehub and it came out a one gorgeous wheelset I might say! No scratches, very little lateral runout, bearings are smooth, even stickers are looking almost mint! Will run these with Zipp Platinum brake pads.
Now the question is: what sealant to use for this butyl inner tubes?
viewtopic.php?f=3&t=135991&p=1708718#p1708718
2018 Cannondale SuperSix EVO 2 rim size 56 (raw stripped) 6.8kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
-
- Posts: 279
- Joined: Tue Apr 13, 2021 3:00 am
It seems impossible to find Orange sealant here in Japan, but I can easily get Stan's NoTubes in small 50ml bottle. Is it ok for butyl inner tubulars? In particular I have Continental Force Comp tires.
Last edited by charirider on Sun Aug 14, 2022 3:21 am, edited 1 time in total.
2018 Cannondale SuperSix EVO 2 rim size 56 (raw stripped) 6.8kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
2014 Bridgestone Anchor CX6 Equipe size 55 (cyclocross) 9.6kg
Should be fine. If you could find it - I ve had good experience on tubulars with Bontrager's sealant.charirider wrote: ↑Sat Aug 13, 2022 9:56 amIt seems impossible to fing Orange sealant here in Japan, but I can easily get Stan's NoTibes in small 50ml bottle. Is it ok for butyl inner tubulars? In particular I have Continental Force Comp tires.
Corsa Controls are good. On normal roads (with some grit), I am fine with standard Corsa.
Some other options in 27-30mm. Bike24 filters shows quite a few models. Veloflex is expensive; Challenge has good offers - but I have had them fail in the past and the ones with latex inner tubes get more pricey.
Some other options in 27-30mm. Bike24 filters shows quite a few models. Veloflex is expensive; Challenge has good offers - but I have had them fail in the past and the ones with latex inner tubes get more pricey.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com