S-WORKS Tarmac SL6 / 5.44kg

Introduce your new bike! Introduce yourself! Use metric.

Moderators: MrCurrieinahurry, maxim809, Moderator Team

Post Reply
User avatar
justinfoxphotos
Posts: 279
Joined: Thu Jul 25, 2024 12:38 am
Location: Sydney, AUSTRALIA
Contact:

by justinfoxphotos

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image

Image
Latest Photos.

SPECS:

2018 Specialized S-WORKS Women’s (unisex) Tarmac SL6 Size 52 Satin Gloss Monocoat Black/Acid Purple/Rocket Red Fade
Frame: Hopp frame insert (2g)
Seatpost: Hylix 365mm (108g)
Saddle: Berk Lupina short padded (90g)
Stem: Extralite Hyperstem Stealth 100mm -12 degree (76g)
Headset Dust Cover Cap: Ceramicspeed (4g)
Spacer: Extralite 2.5mm (1g) + Extralite 15mm (2g)
Expander Plug: Extralite UltraStar 4 (5g)
Top Cap/Bolt: Extralite Ahead Top Cap (3g)
Bars: EXS R175 360mm (175g)
Bar Tape: EXS Airtape (30g)
Bar Ends: Lucendi (0g)
Out-front mount: Alpitude Stelvio (18g)
Shifters/Brake Levers: SRAM Red eTap (267g)
Front Derailleur: SRAM Red eTap (164g)
Rear Derailleur: SRAM Red eTap (245g)
Cranks: SRAM Red 167.5 (363g)
Chainrings: Extralite Mid Compact Octaramp 50/34 (93g)
Brakes: Cane Creek eeBrakes for SL6 +adapter (176g)
Brake Cables: Jagwire + black teflon coated inners + hardware (76g)
Pedals: Xpedo Thrust SL Titanium (165g)
Bottle Cage: CarbonWorks + cage bolts (9g)
Wheelset: Wheelsfar Feder 45mm Extralite hubs Sapim CX-Super spokes (1280g)
Cassette: ZTTO SLR Gen3 11 Speed ​​11-28 (110g)
Cassette Lock Ring: Extralite ExtraBolt 3.6 (3g)
Chain: Dura-Ace/XTR 12-Speed (230g)
QR Skewers: Extralite (29g)
Tyres: Panaracer Agilest Light 25mm (335g)
Tubes: RideNow TPU Road Light (71g)

Weight: 5.44kg

________________________________________________________

I’ve been gawking at a Facebook Marketplace listing for an Italian made BASSO x MAAP Diamante rim brake bike, it’s been listed for a while now and the seller has recently reduced the price. It blows my mind that it hasn’t sold (I think it’s gorgeous enough to hang on the wall as art), then again there’s a couple of Specialized S-WORKS SL5’s for sale that also don’t seem to be selling. I suppose nobody wants a rim brake bike anymore these days?

I’m still set on a Specialized S-WORKS Tarmac SL8 frameset (I mean come on, 8 is my lucky number!), but the $9,500 AUD asking price for the frame alone is something I just can’t swallow (and even if I could I’m not sure I love any of the currently available colours enough).

I messaged the seller of the BASSO. I hate to waste anyone’s time as I semi-knew I was 50/50 on the bike, but after a brief back and forth I told him I’d sleep on it and only bother him again if I was sure on the bike. I slept on it, then I slept on it for another night, and another, then yesterday morning a size 52 S-WORKS SL6 popped up on Marketplace.

Some say the Specialized S-WORKS Tarmac SL6 is the last and best rim brake Tarmac Specialized have (and will) ever make (universally praised on launch and some even go as far as saying it’s the best rim brake bike of all time). The listing was made by someone who was selling it for a friend who wasn’t on Facebook (who the hell isn’t on Facebook these days?!). The pictures weren’t great, and the seller was selling the bike along with a billion accessories; a Garmin 520, lots of tubes, C02 canisters, a spare short cage SRAM Red rear derailleur, a helmet, shoes and more (IE: it looks like the seller had quit cycling for good).

The asking price was $4,600 AUD negotiable. I messaged the seller, and got the phone number of the actual seller. I sent an SMS yesterday morning to say I’m interested to come look at the bike, but by late afternoon I hadn’t heard back. I called the number instead and got voice mail so I left a message, and later that night I got a call and we organised for me to come look at the bike the next morning.

This morning I drove out to check out the bike, and first impressions were GREAT! I couldn’t care less about the components, my main goal was to thoroughly look over the frame and the frame looked as good as new.

Turns out the owner was a super chatty guy. He bought the women’s frameset (it’s actually unisex) as it was the only frame available at the time and he had the bike built up and serviced by Chris Schofield at Velo Tech Centre, then Covid hit and the bike was never ridden again. IE: He has not ridden the bike for 4 years, and the bike has been sitting in his garage gathering dust since the pandemic.

He insisted that I take the bike for a spin. Batteries were dead, but air went into the tyres just fine, and off for a spin I went. Surprisingly the saddle height and 100mm stem felt fine. The bike was stuck in an easier gear but I tried my best to stamp out of the saddle multiple times to see if there was any creaking coming from the press-fit BB, no creaks. The sound of pads on carbon rims sure sounds wild though (terrible, actually!), but apart from the brakes, the bike felt fast.

We ended up chatting a whole lot more about the state of bicycles, how expensive the new S-WORKS Tarmac SL8 is, and the slow death of rim brakes. I ended up showing him the listing of the BASSO that I was interested in (now dropped to $3,600 AUD), and that the listing for that bike, and many other great rim brake bikes were still up with no takers. I let him know that I’m probably more of an outlier in that I like bikes that others might not be so interested in, and that for $4,600 AUD more people would probably take a brand new SL7 Sport over his old SL6.

We started talking price, and in the end I got it for $3,900 AUD with batteries, charger, cleats for the pedals and spare SRAM Red short derailleur (I negotiated the helmet, shoes and the plethora of other misc items out from the final sale).

Image
Literally started raining just as I started taking some photos of the bike (as is straight from the seller's house).

Image

Image

Image

Image
Pretty happy she’s now mine!

Next step is to give her a good clean (though she’s already pretty damn clean!), replace the dead batteries in the shifters. I don’t own another set of road shoes for the Look cleats, so I’ll have to figure something out (maybe SPD’s for my other pair of shoes for now), replace the saddle with my S-WORKS Power saddle, maybe bin the cages for the AliExpress cages I have in the parts bin and then (after a few rides!) I’ll start planning a build with the aim to at the very least get the bike into the mid 6kg’s.

SPECS: 2018 Specialized S-WORKS Tarmac SL6 “Women’s” (Unisex size 52) in Satin Gloss Monocoat Black/Acid Purple/Rocket Red Fade.

GROUPSET: SRAM Red e-Tap, ROTOR 3D crankset (172.5), Power2Max Power Meter, Praxis Works Chainrings (53/39), Campagnolo Direct brake calipers, SwissStop pads, Shimano Ultegra cassette (11-32).

WHEELS & TYRES: Zipp 202 Firecrest Carbon Clinchers (32mm), Zipp Aero skewers, Continental GP 4000 S II (28mm).

COMPONENTS: ENVE Aero stem (100mm), ENVE SES Aero handlebar (420mm), Look KEO Blade Carbon pedals, Specialized Power Comp saddle, ENVE K-Edge computer mount, TWE carbon water bottle cages, Fabric bar tape.

WEIGHT:
7.47kg
Last edited by justinfoxphotos on Sat Jan 11, 2025 5:15 am, edited 17 times in total.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
wheelbuilder
Posts: 1519
Joined: Wed Feb 08, 2017 2:10 am

by wheelbuilder

Nice SL6. Congrats. If you want a new rim brake frame, Basso still does it with the Diamante. I have a 2023. Was emailing with my contact at Cicli Corsa and he confirmed they will produce a my25 Diamante.
Never cheer before you know who is winning

User avatar
justinfoxphotos
Posts: 279
Joined: Thu Jul 25, 2024 12:38 am
Location: Sydney, AUSTRALIA
Contact:

by justinfoxphotos

wheelbuilder wrote:
Sun Sep 29, 2024 7:31 am
Nice SL6. Congrats. If you want a new rim brake frame, Basso still does it with the Diamante. I have a 2023. Was emailing with my contact at Cicli Corsa and he confirmed they will produce a my25 Diamante.
Cheers! Pretty chuffed it's mine to be honest. And that's awesome that Basso are still doing rim brake Diamante's. This is the MAAP collab model I was looking to buy on FB Marketplace before I picked up this S-WORKS (it's still for sale).

Image
Love the loud graphics and I think it would look even better with the stem slammed, and maybe some 45 deep wheels.

PS: Just replaced the Power saddle with my old S-WORKS Power saddle and the heavy ENVE stem with a lighter Kalloy Uno stem (also 100mm but -12 instead of -6). Took the bottle cages off and whacked on a lighter AliExpress one and the bike now weighs 7.25kgs.

I'd assume the ROTOR alloy crankset and old power meter would be pretty heavy (I do have a spare set of RED crankarms but no spider or rings for it), and when I removed the ENVE stem I saw that the bars were 420mm (the seller said they were 380 but when I looked for 380 ENVE bars they don't even exist). I'm assuming the tubes in both wheels would be heavy butyl tubes (as he had a tonne of those as spares that were meant to come with the bike) so using some Tubolito tubes might be the go. The Ultegra cassette is 292g wheras a SRAM RED 11-speed cassette is 151g. I'm excited that getting it into the 6kg's won't take too much effort.

warthog101
Posts: 1236
Joined: Wed Sep 25, 2013 10:05 am

by warthog101

I like the SL6 better than the Basso. You've done well. :)

User avatar
justinfoxphotos
Posts: 279
Joined: Thu Jul 25, 2024 12:38 am
Location: Sydney, AUSTRALIA
Contact:

by justinfoxphotos

Noticed there's no SL6 Owners Facebook Group so I created one (if you own one, or appreciate SL6's please join up!): https://www.facebook.com/groups/1223748342001336

Went out and got some batteries today for the shifters and charged up both derailleur batteries and to my surprise everything is still hooked up and working. One battery either didn't charge though, or it's dead (I was freaking out as the rear derailleur wasn't working, but when I swapped the front mech battery to the rear it works).

Image
Took the old bar tape off and hold up guys, we have a Contador fan here! The bars were double wrapped!

Image
ENVE stem is porky.

As much as the ENVE Aero stem seems to be loved out there I personally hate the look of it, but it's a pretty clever design that uses a sleeve to adjust angles and even position further forward or back. What I hated the most about how it looked was how it hung over the back of the fork steerer, but I think it would look better if the sleeve was flipped so the stem moves further forward. Then again it's also the super ugly 20mm cone spacer that's stopping the ENVE stem from looking good.

I set out to find a smaller spacer, no luck finding an 8.5mm Specialized spacer (no longer in production) but found that Ceramicspeed make one in a 4mm, and one in 8mm (they're called Ceramicspeed headset dust covers) so I've ordered both. 100% sure the ENVE stem would look amazing if it was slammed with the 4mm spacer, but also sure I won't be very comfortable at all.

Image
Weight of the short cage derailleur I got with the bike. Not sure how much lighter it is from the long cage, but swapping out the derailleurs and puptting on a smaller and lighter rear cassette is most likely on the cards.

7.2kg flat now. Spent some time researching Cane Creek EE brakes, and it turns out the smaller SL6 frames need an adaptor to fit. Bad news is Cane Creel no longer make that adaptor so I reached out to my mate who owns CCACHE (my local bike shop) and asked him if I'm doomed as they don't make the adaptor anymore. His reply was "ahahahah yup you're doomed!". Turns out he's had a few people in need of these adaptors, but he has faith in me, and if I ever find one CCACHE has the ability to scan them, and make their own which should benefit SL6 owners in future who want to fit EE brakes.

maxim809
Administrator
Posts: 1037
Joined: Sat Feb 25, 2017 6:28 am

by maxim809

Between SL6 and MAAP Diamante, you made the right choice.

gurk700
Posts: 1164
Joined: Fri Jan 20, 2017 7:40 pm

by gurk700

Check my ex-bikes in signature. SL6 is the only one I consider buying again ;)
Good choice.
Current bikes: '24 S-Works Tarmac SL8, '24 Specialized Allez Sprint
Disgusting list of bikes owned

User avatar
justinfoxphotos
Posts: 279
Joined: Thu Jul 25, 2024 12:38 am
Location: Sydney, AUSTRALIA
Contact:

by justinfoxphotos

warthog101 wrote:
Sun Sep 29, 2024 12:08 pm
I like the SL6 better than the Basso. You've done well. :)
maxim809 wrote:
Mon Sep 30, 2024 6:06 am
Between SL6 and MAAP Diamante, you made the right choice.
gurk700 wrote:
Mon Sep 30, 2024 6:10 am
Check my ex-bikes in signature. SL6 is the only one I consider buying again ;)
Good choice.
Cheers guys. I think I made the right choice too!

And Gurk, yup very well aware of your old SL6 build (I spent hours last night going through all the previous SL6 builds on this forum). Those dainty chainrings on the phat S-WORKS carbon crankarms just look SO right. Love all your previous builds, you have great taste!

User avatar
wheelbuilder
Posts: 1519
Joined: Wed Feb 08, 2017 2:10 am

by wheelbuilder

I also think you made the right choice considering what you have and that MAAP colorway. Here is mine with said slammed stem. Don't see curved forks on carbon very often. Image
Never cheer before you know who is winning

CrankAddictsRich
Posts: 2490
Joined: Wed Jan 27, 2016 1:39 pm
Contact:

by CrankAddictsRich

Justin... as I said on FB, awesome come up. This is a fantastic bike. This colorway was marketed as a female model, but that really made no sense. I had a good friend that scopped one of these when they first came out and it was always an awesome looking bike. It will be interesting to see what you think of rim brakes in the long run. I honestly couldn't imagine ever wanting to go back to a rim brake bike. The ease of maintence on rim brake is certainly nice for sure, but IME, I rarely have to do anything with my disc brakes anyway and they just always work so well, in any conditions.

I can't wait to see your progression on the build of this bike.... best of luck with it and many, many happy miles.

Eraser92
Posts: 16
Joined: Fri Jul 26, 2019 11:35 am

by Eraser92

I've also been lusting after a SL6 rim brake. I'm kind of surprised at the weight though. Those Zipp wheels and Rotor crankset must be real boat anchors! My CAAD12 in size 56 weighs only 7.35kg and it's on alloy (admittedly nice 1450g) wheels and bar/stem.

I'll be continuing my search for one of these for a bargain on FB/ebay!

bilwit
Posts: 1536
Joined: Sun Apr 03, 2016 5:49 am
Location: Seattle, WA

by bilwit

Awesome pickup. I'm biased but this era of bike will always be special to me, it's the last modern rim brakes in the pro peloton and the first time dropped stays, aero hints, and (slightly) larger clearance (28-30mm depending on the bike/setup) became standard, kinda crazy that it's already been 7-8 years already.

I always loved the look of old SRAM hoods.

The ENVE bars have crazy flare but go by the measurement of the drops so it's possible the seller was referring to the measurement on the hoods.
Eraser92 wrote:
Mon Sep 30, 2024 3:50 pm
I've also been lusting after a SL6 rim brake. I'm kind of surprised at the weight though. Those Zipp wheels and Rotor crankset must be real boat anchors! My CAAD12 in size 56 weighs only 7.35kg and it's on alloy (admittedly nice 1450g) wheels and bar/stem.

I'll be continuing my search for one of these for a bargain on FB/ebay!
Most of that weight is probably the crankset + ENVE cockpit

User avatar
justinfoxphotos
Posts: 279
Joined: Thu Jul 25, 2024 12:38 am
Location: Sydney, AUSTRALIA
Contact:

by justinfoxphotos

CrankAddictsRich wrote:
Mon Sep 30, 2024 1:33 pm
It will be interesting to see what you think of rim brakes in the long run. I honestly couldn't imagine ever wanting to go back to a rim brake bike. The ease of maintence on rim brake is certainly nice for sure, but IME, I rarely have to do anything with my disc brakes anyway and they just always work so well, in any conditions.
Cheers Rich! Yeah 100% the brakes feel (and sound) terrible in comparisson to disc brakes on the Allez. Nowhere near the same stopping power and they feel far from smooth (will replace cables with black teflon coated cables and cable housings ASAP).

The main reason why I bought the Allez Sprint was because I felt that my old 80's road bike felt like a death trap. The brakes literally don't work lol, and it had been so long since I'd ridden it that I'd lost my touch with the non-SIS downtube shifters.

Still have the bike though. I restored it frame up (found the original painter who painted the frame in the 80's to repaint it for me!) and hand polished every part. It's a keeper.

Image
80's Paino road bike.

Image

Image
Eraser92 wrote:
Mon Sep 30, 2024 3:50 pm
I've also been lusting after a SL6 rim brake. I'm kind of surprised at the weight though. Those Zipp wheels and Rotor crankset must be real boat anchors! My CAAD12 in size 56 weighs only 7.35kg and it's on alloy (admittedly nice 1450g) wheels and bar/stem.
Yeah definitely came in a bit over what I was expecting. My Allez Sprint is 7.5kg's with 65 deep wheels on it so I'm sure once I replace the crankset and wheelset this bike will be in the 6kg's.
bilwit wrote:
Mon Sep 30, 2024 4:05 pm
The ENVE bars have crazy flare but go by the measurement of the drops so it's possible the seller was referring to the measurement on the hoods.
You're right! Seller said 370mm and bang on the bars are 370mm at the hoods! I'm happy with that as I mostly ride in the hoods. Not a fan of the funny looking bar ends (bit... phallic looking!) and pretty heavy at 270g.

mike
Resident Pro
Posts: 3185
Joined: Tue Mar 18, 2003 9:42 pm

by mike

very nice sl6. the basso map is also very nice

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



User avatar
justinfoxphotos
Posts: 279
Joined: Thu Jul 25, 2024 12:38 am
Location: Sydney, AUSTRALIA
Contact:

by justinfoxphotos

Image
First world problems. Should I buy another pair of shoes for these LOOK KEO Blade pedals or should I just buy another pair of pedals so I can use the one pair of shoes between the SL6 and the Allez? The Xpedo pedals I have on the Sprint weigh in at 166.2g so I decided to put an order in for another set for the SL6.

Image
Whacked on my old XTR SPD pedals and met up with Nick at CP for a few laps this morning. Saddle was a bit high, but it’s not going to take me long to get the fit dialled in. Gears shift so good, as good if not better than the SRAM RED E1 on my Allez. The Allez definitely feels faster though, both in the saddle and out of the saddle.

Image
Ran into Jennifer Kay at the cafe and blurted out “Hey I’ve seen you on YouTube!”. LOL I crack myself up (100% I must have come across as a creeper), but she’s the main inspiration behind me buying the SL6. Seeing her bike in real life and having a chat about it was awesome.

Image
She had her frame custom painted, and all the intricate details are made of gold leaf (especially love this inside fork detail inspired by Australian mid century interior designer Florence Broadhurst). Follow her on Instagram: @jenniferlouisek

Post Reply