Basso diamanté super record eps 12 2021.

[MrCurrieinahurry]

OK guys so the build has begun now my frame is back.

I don't have camera skills and backdrops of Nis and certainly don't have the language skills of maxim or a workshop as beautiful as Ryan (rhino's workshop) but hey still think I put together a mean build.

Here's the build list

Basso diamanté rubin red 56cm with custom carbon entry ports, carbon under bb plate.
Basso integra bars 120/44
Italian flag spacers
Campagnolo super record eps 12v groupset with 170mm cranks 52/36, 11-29 cassette
Internal bar interface and cables.
C bear bottom bracket
Basso integra comp mount
Speedplay ti pedals with gold ti butterfly plates and gold axles
Supercaz carbon gold fly cages with alloy bolts
black basso bar tape with italian finishing tape
Berk Lupina saddle custom basso rubin red paint on bridge
Custom basso diamanté seatpost (hopefully comes
Wahoo roam
Vredestein superlight latex tubes

Still need to purchase wheels but leaning towards wto 45 or 60's.

[LouisN]

Where did you source the custom carbon entry ports and bottom plate ? Any sensible weight savings ?

Louis

[MrCurrieinahurry]

Ha.. I knew someone would ask this.. Tbh was done for vanity reasons lol. Had someone make them all custom for me.

[LouisN]

Tbh was done for vanity reasons lol.

This is redudant , and what WW is all about .

Louis

[MrCurrieinahurry]

Tbh this isn't a weight weenie build mate.

[CustomMetal]

I could so do with some blanking plates for the Tifosi...

[MrCurrieinahurry]

Campy freehub and casette installed. Im still waiting for this internal routing kit to arrive.. Hoping its not lost in the post

[Zack89]

Stunning!!

[MrCurrieinahurry]

Few bits went on today

[MrCurrieinahurry]

[caselawz28]

OK guys so the build has begun now my frame is back.

I don't have camera skills and backdrops of Nis and certainly don't have the language skills of maxim or a workshop as beautiful as Ryan (rhino's workshop) but hey still think I put together a mean build.

Here's the build list

Basso diamanté rubin red 56cm

Could you describe the rubin red paint? Is it a solid red; sparkly; sort of color dependent on light like the electric blue? Shiny or matte?

I'm borrowing an electric blue right now, and I wouldn't be able to full appreciate the paint and what it looks like without seeing it. Even more so with the chameleon in the new SV. Trying to get a feel for whether to go with the electric blue or the rubin red.

[MrCurrieinahurry]

I've just realised I havent completed this build thread.... Will get on it tomorrow for those interested.


Sent from my M2101K6G using Tapatalk

[MrCurrieinahurry]

Ok guys want to lighten this post up found this on ebay with some damage for £15 quid so thought why not.. as you can see from the pics these basso posts are very un weight weenie and it's been bothering me .

I'm will get it sanded down and either clear coat over the carbon or re paint the red.

It will get the chop from just below the min insertion line which will still give me 100mm of insertion into the frame (which is what is suggested)

Where I'm struggling is the saddle clamp.. especially the upper part. The lower cradle I'm thinking one of these.

Mcfk is 8 grammes
Scmolke Is unknown
Smud is 9 grammes.

For the upper part of the saddle clamp I think I maybe stuck with this unless you guys have an idea??


Any advice warmly received

Sent from my M2101K6G using Tapatalk

[itsacarr]

A torrent of emails to Darimi might help

Either way I support you in your sanding goals

[MrCurrieinahurry]

Yea I know Ill prob end up with only a small weight saving but hey ho this is weight weenies and we must strive for the grammes saved

Sent from my M2101K6G using Tapatalk