'24 Scott Scale project

[pistonbroke]

Here we go guys...
Size L Scale 930
All up weight with reflectors and no pedals 12480g
Lots of porky parts on her!

Frame (hmf) with outer gear cable and top headset bearing race.
1255g

Fork:
FOX 32 Float Rhythm Grip, 3-Modes / 15x110mm QR axle / 44mm offset / tapered steerer, 100mm travel.
1900g

Wheels
Rims: Syncros X-30SE / 32H / 30mm
Tyres: F: Schwalbe Racing Ray 29x2.35", Performance Folding / TLE Tubeless ready / Addix, R: Schwalbe Racing Ralph 29x2.35", Performance Folding / TLE Tubeless ready / Addix
Hubs: F: Formula CL-811 / 15x110mm, R: Shimano FH-MT410-B CL / 12x148mm / Micro Spline
Cassette: Shimano Deore CS-M6100-12 / 10-51 T
Spokes: Stainless Black 15G / 1.8mm
Plus inner tubes.
Front complete 2325g
Rear 3290g

Chainset: Shimano FC-MT512-1, 55mm CL / 32T
845g

Saddle: Syncros Belcarra Regular 2.5
Seatpost: Syncros / 31.6x400mm
Combined weight 605g

Grips: Syncros Performance XC lock-on grips
98g

Stem: Syncros Alloy 6061 dc3
195g

Handlebars: Syncros Fraser 2.0 XC 740mm
325g

Replacements so far..
Mavic Crossmax wheels with 11 speed 11 40 block (plenty for hills round here) and Quaxar rotors
Front 947g
Rear 1500g
Sid SL forks plus axle
1500g
SRAM XX1 sl chainset 32t
465g
Carbon bars
200g
Seat and post
250g
Funn stem
105g
Clarks CRS brakes
F 212g
R 232g
ODI Grips
18g
Post clamp
9g

Still waiting for a few bits to show up but the aim is to hit sub 9kg for under 2k all in.

[pistonbroke]

Current weight...9284 including pedals and computer mount.
That's approx 3.5kg's gone
Was aiming for high 8's but hey ho. Can grab 100ish g's on tyres when it comes to replacing them but that's probably about it without major outlay.
Sold the parts I've replaced, so an all up cost of approx 1600 quid, not the cheapest but I think it's worked out pretty well.