Is Dura Ace 7900 only mediocre?
Moderator: robbosmans
I guess since the new stuff came out all I hear is raving about that and saying how 7900 was a bit of a miss.
For me I am having a hard time adjusting to SRAM with its one lever.
So is the 7900 shifting components still strong enough for racing? Is it hard to keep adjusted?
I was planning on using TRP R970 SL brakes, would they match up with the 7900 levers?
Thanks dudes. Your the best.
For me I am having a hard time adjusting to SRAM with its one lever.
So is the 7900 shifting components still strong enough for racing? Is it hard to keep adjusted?
I was planning on using TRP R970 SL brakes, would they match up with the 7900 levers?
Thanks dudes. Your the best.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
mattcooke wrote:I guess since the new stuff came out all I hear is raving about that and saying how 7900 was a bit of a miss.
For me I am having a hard time adjusting to SRAM with its one lever.
So is the 7900 shifting components still strong enough for racing? Is it hard to keep adjusted?
I was planning on using TRP R970 SL brakes, would they match up with the 7900 levers?
Thanks dudes. Your the best.
No. 7900 i impossible to race with. IMPOSSIBLE!
What do you mean ?
I've ridden it for 2 seasons. Works excellent. No races however. But what's the difference?
Last edited by PSM on Fri Feb 15, 2013 8:59 am, edited 1 time in total.
I've used 7900 for years and if correctly fitted and adjusted it works perfectly. I'm not going to be upgrading anytime soon due to cost and free hub compatibility.
Ti or dye!
The Weenie formally known as CAADHEAD
The Weenie formally known as CAADHEAD
7900 works fine but its more sensitive to friction than other groups, meaning over time any added wear in the drivetrain or cables and the shifting will degrade faster. I always notice that if I ride consecutive days in bad weather conditions the shifting usually goes to shit.
I find SRAM Red to be far superior to shimano 7900. The lever throw is far softer (good thing!). Is this what you guys mean by flex? I think some of you may have your priorities mixed up. Stiffness in the frame, crank, wheels etc is good. Stiff lever throw is bad! The new 9000 group supposedly requires 60% less lever force to go through the gears. I cant wait to have it replace my 7900 group. hasta la vista 7900!
I find SRAM Red to be far superior to shimano 7900. The lever throw is far softer (good thing!). Is this what you guys mean by flex? I think some of you may have your priorities mixed up. Stiffness in the frame, crank, wheels etc is good. Stiff lever throw is bad! The new 9000 group supposedly requires 60% less lever force to go through the gears. I cant wait to have it replace my 7900 group. hasta la vista 7900!
Factor O2 Rim / Winspace 1500 Disk / Yoeleo R6 Rim / Cervelo S2 Rim
aerozy wrote:7900 works fine but its more sensitive to friction than other groups, meaning over time any added wear in the drivetrain or cables and the shifting will degrade faster. I always notice that if I ride consecutive days in bad weather conditions the shifting usually goes to shit.
Are you serious?
- Tinea Pedis
- Posts: 8616
- Joined: Sat Mar 14, 2009 6:08 am
- Contact:
I had to re-do cables on SRAM more than Shimano. Campag the least of the lot.
Given what 7900 would be going for now, it's 100% fine for racing.
Given what 7900 would be going for now, it's 100% fine for racing.
aerozy wrote:I cant wait to have it replace my 7900 group. hasta la vista 7900!
This bodes well for my plans to ride (mechanical) Shimano 2x10 for the foreseeable future, and populate my spares cupboard accordingly. Go get rid of that old junk, fellas!
Bikes: Raw Ti, 650b flatbar CX
My Tarmac started life with Sram Red and after 6 months and countless changes/adjustments/shop time, I had my dealer just take it all off and put 7900 on it. That was a little over 2 years ago and my gear train performance has been flawless since. It shifts perfect and feels great. The only change that I have made on it was to put Gore Ride-on shifter cables on it. Smooth, refined and elegant feeling. I purchased a spare 7900 group that is sitting in my closet waiting for my next build. I don't plan on ever having Sram on my road bike again.
"7900 works fine but its more sensitive to friction than other groups, meaning over time any added wear in the drivetrain or cables and the shifting will degrade faster. I always notice that if I ride consecutive days in bad weather conditions the shifting usually goes to shit."
To the poster who wrote the above - you simply have a little dirt/etc. in the housing loop at the rear derailleur. Pull the housing out of the stop, wipe the cable with a touch of light lube, and your're good to go. A 30 second piece of maintenance, not a flaw in your groupset. If you ride in bad weather often enough (or to save decrease your maintenance time if you race cross), just use sealed cables here if not everywhere on your bike,
Is 7900 good enough for racing ? You've got to be kidding. This (and significantly inferior prior generations as well as all Campy and SRAM mid to high level stuff) has been used to win grand tours, cobbled classics, etc. It will hold up to a cat 4 parking lot crit (or several thousand of them) pretty well. Fairly absurd question - had to be said. Flame away.
To the poster who wrote the above - you simply have a little dirt/etc. in the housing loop at the rear derailleur. Pull the housing out of the stop, wipe the cable with a touch of light lube, and your're good to go. A 30 second piece of maintenance, not a flaw in your groupset. If you ride in bad weather often enough (or to save decrease your maintenance time if you race cross), just use sealed cables here if not everywhere on your bike,
Is 7900 good enough for racing ? You've got to be kidding. This (and significantly inferior prior generations as well as all Campy and SRAM mid to high level stuff) has been used to win grand tours, cobbled classics, etc. It will hold up to a cat 4 parking lot crit (or several thousand of them) pretty well. Fairly absurd question - had to be said. Flame away.
- shoemakerpom2010
- Posts: 296
- Joined: Mon Apr 11, 2011 6:28 pm
- Location: Palm Coast, Fl.
This is some great answers. I was too planning on red for a rebuild but also on 7900 since they can bad had much cheaper on the bay. I went for two years on my 7800 with not so much as an adjustment and I ride rain or shine. My friend who has a year old tri bike with red that only rides in good weather makes adjustments all the time. The question would be how does the 2013 red stack up to 7900.......
I'm riding Sram Rival levers with Force rear derailleur and 7900 front derailleur (both derailleurs are tuned)
I ride this setup in all conditions and never ever had to adjust a thing. In my opinion the key point for a good working groupset (all groupsets) is cable and housing length and routing. I spend a lot of time in trimming my housings when i install them and don't have to look after them when finished.
I ride this setup in all conditions and never ever had to adjust a thing. In my opinion the key point for a good working groupset (all groupsets) is cable and housing length and routing. I spend a lot of time in trimming my housings when i install them and don't have to look after them when finished.
I Will make the leap
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com