S-Works Venge 2019

[BigBoyND]

RSL VR-C in 38cm width

[Metaleckz]

RSL VR-C in 38cm width

You got pics?

[BigBoyND]

RSL VR-C in 38cm width

You got pics?

[scapewalker]

Can anyone recommend a cheap but not too heavy 165mm crank for the Venge?
Trying to match crank length to my other bikes and would rather not switch the bottom bracket.

[BudhaNL]

A slightly related question.

I am looking to replace the Ultegra 52/36 crankset on my 2019 Venge Pro with a Sram Red 50/34 BB30.

Would that require adapting the crank itself as well beyond removing the shimano 24mm adapter that is in de Pro frame (if I read correctly in these 237 pages, I'm not particularly technical...)?

Thanks!

[robbosmans]

Can anyone recommend a cheap but not too heavy 165mm crank for the Venge?
Trying to match crank length to my other bikes and would rather not switch the bottom bracket.

You can find bb30 sram red cranks 2hand pretty easily for not much money. Very light too.

[scapewalker]

Can anyone recommend a cheap but not too heavy 165mm crank for the Venge?
Trying to match crank length to my other bikes and would rather not switch the bottom bracket.

You can find bb30 sram red cranks 2hand pretty easily for not much money. Very light too.

Would this crankset https://www.starbike.com/en/sram-red-cr ... peed-bb30/ work with my Dura Ace Di2 Venge? I'm not very savvy

[robbosmans]

Yes

[Jaisen]

Yes

What chainrings would work? It seems this crankset uses the 110/130 BCD standard with 5 bolts, but I think Dura Ace chainrings are on 110/130 asymmmetric 4 bolt BCD? Does anyone make Shimano chainrings with a 5 bolt standard?

[robbosmans]

Those stock chainrings will work fine with Shimano, Praxis is also good. I would go for 110bcd

[Charlie69]

Has anyone managed to fit a roval rapide cockpit to a venge with a slammed stem? Is anyone making a combined dust cap and transition spacer that might make this possible?

[AZR3]

Has anyone managed to fit a roval rapide cockpit to a venge with a slammed stem? Is anyone making a combined dust cap and transition spacer that might make this possible?

Try these guys, they seem to do a bunch of custom headset covers for a variety of stems/integrated bars

https://instagram.com/thestickybottle?i ... FlYzFmZQ==

[Charlie69]

Has anyone managed to fit a roval rapide cockpit to a venge with a slammed stem? Is anyone making a combined dust cap and transition spacer that might make this possible?

Thanks very much
Try these guys, they seem to do a bunch of custom headset covers for a variety of stems/integrated bars

https://instagram.com/thestickybottle?i ... FlYzFmZQ==

[adriant]

Does anyone know if the geometry is the same for sl7 and venge?

Capture1.JPG (48.63 KiB) Viewed 1317 times

Is the stack from the sl7 higher? The mandatory spacer is not included on Venge?

[adriant]

Does anyone used that spacer?
https://www.racewaredirect.co/shop/spec ... er-spacer/

And got any pictures?