Stack and Reach question
Moderator: robbosmans
-
- Posts: 795
- Joined: Mon Mar 28, 2016 6:34 pm
- Location: Romania
Sounds right, b-e. Seems normal for an xl. Giant tcr xl is 412.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Based on that chart, I calculated:
stack: 580mm
reach: 398mm
stack: 580mm
reach: 398mm
-
- Posts: 103
- Joined: Sun Dec 04, 2016 10:26 am
Hiya, I wholeheartedly recommend the Velogic Fit app... registration is free and the "bike comparison tool" is also free... it is very helpful when comparing bikes, as the database seems to be quite up to date...
I put in your Look, the app says: Reach 398, Stack 581
All other measurements are there too...
I put in your Look, the app says: Reach 398, Stack 581
All other measurements are there too...
wingguy wrote:Lookryder wrote:Thank you so much!! I knew I was off a bit.
You know it's very easy to physically measure it as well, right? All you need is a flat floor, vertical wall and a tape measure...
I know. I did meausre it myself several times and the repeatability of the measurements was not good enough for me; it would vary by a few mm every time. I wanted to know what was listed on the the geo chart as I'm trying to find a frame of similar stack and reach. The more data the better.
-
- Posts: 12577
- Joined: Mon Jul 24, 2017 12:02 pm
Valbrona wrote:But in the above chart doesn't B' show reach?
B' is actual top tube length. Frame reach is B minus E.
-
- Posts: 854
- Joined: Tue Jul 18, 2006 5:18 am
- Location: Cambridge, New Zealand
- Contact:
mike001100 wrote:Hiya, I wholeheartedly recommend the Velogic Fit app... registration is free and the "bike comparison tool" is also free... it is very helpful when comparing bikes, as the database seems to be quite up to date...
Just a note on using the database - if you scroll to the bottom of the frame specifications you'll see the 'Calculated Measures' field. Which tells you which metrics I've had to calculate.
In the case of the 586 - that's wheelbase, reach and stack. I have a very robust algorithm for doing that and Look provide really good information on other measures, so there is pretty high confidence. But there is a little more uncertainty than if the manufacturer had provided the XY data.
Having said that, I frequently find errors in the geometry charts of large companies that make a lot of noise about bike fit. So the overall standard of the database is more reliable than other sources.
TobinHatesYou wrote:Valbrona wrote:But in the above chart doesn't B' show reach?
B' is actual top tube length. Frame reach is B minus E.
Keep in mind that if you measure reach doing this, the geo chart indicates that it is measured to the centre/centre intersection of the top tube/head tube junction. Typically reach/stack is measured to the centre of the top of the headtube.
So to compare to others measured as above, you'd need to also look at the headtube measurements (K, KO), read the ht angle, do a bit of trig and subtract a few mm...
Chasse patate
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com