Yup -same here. Works like a charm.topflightpro wrote: ↑Mon Feb 12, 2018 3:04 pmI use generic rare earth magnets with my SRM. I order them online then hot-glue them to the frame. I've got a bunch of different sizes - widths and thicknesses - and I tape them to the frame first to verify the placement and magnet size works. Then glue it on. The glue doesn't permanently mar the frame at all.
Shimano R9100-P Powermeter
Moderator: robbosmans
-
- Posts: 3278
- Joined: Wed Mar 17, 2004 1:38 pm
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
This may or may not work. Compared to the previous SRM cable guide magnet location on my bike, 9100-P magnet is further away from shell centerline and closer to the crank.
2009 Look 595
Thanks. Spare time of late has been pretty rare so hoping I can simply swap out the 9100-P for the SRM. After reviewing the dealer manual, it seems like I should be able to leverage the K-Edge Pro as not only can the K-Edge be angled in an out, the magnet assembly can easily be reformed as when I first installed it, the magnet was rubbing the SRMs torque disc.
- Michael
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
Well the K-Edge Pro works fine with the FC-R9100-P for a Scott Solace disc with BB86, but for the life of me, I cannot get the firmware updated as E-Tube keeps returning ERROR when I try to connect to the powermeter, and suggests using the devices Bluetooth where I find the powermeter is already connected.
Last edited by ms6073 on Sun Feb 18, 2018 9:29 pm, edited 1 time in total.
- Michael
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
Good to know on the K-edge. Try forgetting the powermeter's BTLE connection on your device, and retry.ms6073 wrote: ↑Sun Feb 18, 2018 2:19 amWell the K-Edge Pro works fine for the FC-R9100-P, but for the life of me, I cannot get the firmware updated as E-Tube keeps returning ERROR when I try to connect to the powermeter, and suggests using the devices Bluetooth where I find the powermeter is already connected.
I've been looking at power balance, see pic. A ride with a ~250w threshold climb and some ~190w endurance rollers. Power balance was about 50-52% on the climb, and 52-54% on the rollers.
2009 Look 595
Thanks. Installed the e-tube on Smartphone and e-tube for Tablet and neither case would it connect from e-tube! Curiously, with my Garmin Edge 520, running the calibration process from the Garmin and I get 150000/250000, for which the dealer manual does not elaborate so I am unsure of whether this is expected behavior or not. Guess I am going to try and call Shimano USA.
- Michael
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
"People should stop expecting normal from me... seriously, we all know it's never going to happen"
DC Rainmaker has installed his Dura Ace powermeter....finally....
https://www.dcrainmaker.com/2018/02/5-r ... nd-61.html
https://www.dcrainmaker.com/2018/02/5-r ... nd-61.html
I'd bank on a few months of testing; something comprehensive - not initial results based.moyboy wrote: ↑Fri Feb 23, 2018 3:58 pmCurious to see how long it takes for him to put up his initial results.
TonyM wrote: ↑Thu Feb 22, 2018 10:22 pmDC Rainmaker has installed his Dura Ace powermeter....finally....
https://www.dcrainmaker.com/2018/02/5-r ... nd-61.html
It's all about the adventure .
- charmette1261
- Posts: 22
- Joined: Tue Jan 02, 2007 11:36 am
- Location: France
More of 4000km with my own
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com