removing logo from chain ring

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Forum rules
Post Reply
Timujin
Posts: 347
Joined: Sun Sep 15, 2013 5:43 pm

by Timujin on Mon Mar 06, 2017 6:13 pm

has anyone removed logo's from etched chain rings... mine is qxl i wanna get rid of the labels..

cheers
Top
addictR1
Posts: 1878
Joined: Sun Jun 10, 2012 1:11 am

by addictR1 on Tue Mar 07, 2017 12:00 am

I have QXL as well but ended up just leaving it as is. Most would suggest to just to paint over it


Sent from my iPhone using Tapatalk
Top

by Weenie on Tue Mar 07, 2017 12:00 am


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com


Top
deek
Posts: 406
Joined: Fri Aug 31, 2012 6:32 pm

by deek on Tue Mar 07, 2017 1:51 am

If they're etched then there's really no practical way
Top
Eclat
Posts: 13
Joined: Sun Mar 05, 2017 3:38 pm

by Eclat on Tue Mar 07, 2017 2:59 am

My suggestion is to paint over it. That's much more easy.
Top
NiFTY
Posts: 1493
Joined: Sat May 26, 2012 11:26 pm

by NiFTY on Tue Mar 07, 2017 3:02 am

Can only paint. I run q rings and have done the same. Tape up the teeth. Use an etcher (comes in a spray can) to make the paint bond. Then a few thin coats of black paint and looks perfect. Lasts forever as the chain should never touch anything but the teeth.
Evo 4.9kg SL3 6.64kg Slice RS 8.89kg viewtopic.php?f=10&t=110579" onclick="window.open(this.href);return false;" onclick="window.open(this.href);return false;
Top

by Weenie on Tue Mar 07, 2017 3:02 am


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com


Top
marynoland
Posts: 2
Joined: Fri Mar 10, 2017 8:16 am

by marynoland on Fri Mar 10, 2017 8:23 am

Its hard to remove the logo. So it will be better to paint the logo.
Top
Post Reply

Return to “Road”