Page 1 of 2
Re-covering a stripped saddle
Posted: Wed Feb 01, 2017 10:55 pm
by Arfer01
Re: Re-covering a stripped saddle
Posted: Wed Feb 01, 2017 11:18 pm
by NiFTY
That looks great. Where did you source the materials and how much weight did it add.
Re: Re-covering a stripped saddle
Posted: Wed Feb 01, 2017 11:18 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 12:35 am
by FilmAt11
Very nice. Also interested in the material that you used. I recently recovered a stripped SLR with a material that was too soft. It was easy to manipulate, but small rips formed in several places around the edges and the binder clips left impressions that haven't faded. Fortunately, it's easy to tear it off and try again.
Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 5:07 am
by KC
It's funny you posted this week about a week ago I bought a square of thin cowhide and some gel foot pads off of eBay to cover a Chinese Toupe copy. I was going to use it on my trainer bike since that's exactly when the sitbone pain really shows up. Sitting for hours on a trainer rivals doing a century for me. The leather has arrived and it seems a bit thick at 1/16" of an inch but that may also be a good thing. I'm still waiting on the gel pads which were thin and made originally for heels of shoes. I have some 2mm foam here as well. I'll do some experimenting.
Sent from my iPhone using Tapatalk
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 5:45 pm
by KC
I'd also like to know where you got the perforated leather. On a side note goat leather is super soft and would work around shapes easily.
Sent from my iPhone using Tapatalk
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 6:07 pm
by dolophonic
Nice work
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 6:33 pm
by stockae92
Nicely done sir!
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 7:21 pm
by boysa
Talk about timing! I recently started experimenting with a Selle Italia SLR Superflow, and while the shape is perfect, I want just a tiny bit more padding. Great job on this... well done.
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 9:01 pm
by duvivr6
Would also like to know more about materials! Looks great.
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 9:43 pm
by Arfer01
I have not yet tested the saddle so am reluctant to post a link to materials, once I know more I will post. I hope that makes sence
Sent from my iPhone using Tapatalk
Re: Re-covering a stripped saddle
Posted: Thu Feb 02, 2017 11:01 pm
by Marin
Doesn't make sense - please tell us where to get the perforated stuff!
Looks great BTW
Re-covering a stripped saddle
Posted: Wed Feb 08, 2017 7:22 pm
by Arfer01
Re: Re-covering a stripped saddle
Posted: Thu Feb 09, 2017 10:59 am
by Marin
Would really like to know what type of foam & cover you are using!
I post a bit about my re-covering projects over here BTW - didn't want to spam your thread ->
viewtopic.php?f=10&t=141018&p=1292524#p1292524
Re-covering a stripped saddle
Posted: Thu Feb 09, 2017 8:45 pm
by Arfer01
With new cover of same material, 99% done just a little tidying to do underneath. Will be testing soon. Saddle started at 77g and is now 120g
Sent from my iPhone using Tapatalk
Re: Re-covering a stripped saddle
Posted: Thu Feb 09, 2017 11:01 pm
by TheKaiser
KC wrote:I bought a square of thin cowhide and some gel foot pads off of eBay to cover a Chinese Toupe copy.I'm still waiting on the gel pads which were thin and made originally for heels of shoes. I have some 2mm foam here as well. I'll do some experimenting.
I picked up a variety of different shoe inserts as well, thinking that they could be a good source of material, given the similar loads thicknesses they were designed around. Watch out when ordering the gel stuff, as some "gel" items are a pliable rubbery solid, but others are an external flexible vinyl envelope filled with a liquidy gel. With that second type, you can't really cut them to shape, as the gel will seep out the cut edge. When ordering from Chinese sellers it is pretty difficult to ask for more detail, so you just need to look at the pics and make your best guess...at least they're cheap!
Re: Re-covering a stripped saddle
Posted: Thu Feb 09, 2017 11:01 pm
by Weenie
Visit
starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com