servicing eecycleworks brakes?

Back by popular demand, the general all-things Road forum!

Moderator: robbosmans

Post Reply
jdc5r
Posts: 214
Joined: Wed Apr 07, 2010 5:05 am

by jdc5r

Has anyone serviced/rebuilt their EEcycleworks brakes? I have the circa 2013 model and i noticed that lever feel is now fairly mushy and not as snappy as it used to be. I thought it was cabling but even after changing cables/frames it is still the same.

Would appreciate if anyone have instructions or some step by steps?

All i could find was the installation instructions.

http://eecycleworks.com/en/wp-content/u ... ings-2.pdf

User avatar
corky
Posts: 1732
Joined: Thu Jul 06, 2006 5:53 pm
Location: The Surrey Hills

by corky

The return springs being titanium are not really that strong, so you could take them off and try bending them out a little by hand, it's a 10 second job. pUll one side out, twist and pull the other, bend and replace.

Other than that, mushiness will be down to cables...... The pivots should not be worn but if they are, you'll need to contact Craig at EE...... He's a very helpful guy.

by Weenie


Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Post Reply