Zipp Speed SL without paint
Moderator: robbosmans
- wheelsONfire
- Posts: 6294
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
My paint was scraped when i torqued the bolts.
I don't know if i had a bad Monday design or if all is same!?
Anyway,i thought that i could make the channels longer and remove the paint.
Took some time but, i think it looks pretty good like this.
I don't know if i had a bad Monday design or if all is same!?
Anyway,i thought that i could make the channels longer and remove the paint.
Took some time but, i think it looks pretty good like this.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- prendrefeu
- Posts: 8580
- Joined: Wed Oct 31, 2007 10:32 pm
- Location: Glendale / Los Angeles, California
- Contact:
And what is the weight difference, please?
(asking the obvious question)
(asking the obvious question)
Exp001 || Other projects in the works.
- wheelsONfire
- Posts: 6294
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
A pitty i can't give an honest answer. My scale is the cheapest possible and it does not make any difference actually.
I think it could be below or around 10 grams as that is margin of error according to the info sheet.
To be honest, i like it better as it is. No horrible big "Z" and it matches the frame.
I think it could be below or around 10 grams as that is margin of error according to the info sheet.
To be honest, i like it better as it is. No horrible big "Z" and it matches the frame.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Hey wOf,
I consider the SL Speed stem "self-marring," as I've never seen one installed that didn't have the paint in front of the bolt damaged by the mere act of installing it. Zipp did not engineer adequate room for an allen wrench to install the bolt! Anyway, I otherwise like this stem and may get another one to give your solution a try! Thanks for posting!
I consider the SL Speed stem "self-marring," as I've never seen one installed that didn't have the paint in front of the bolt damaged by the mere act of installing it. Zipp did not engineer adequate room for an allen wrench to install the bolt! Anyway, I otherwise like this stem and may get another one to give your solution a try! Thanks for posting!
- wheelsONfire
- Posts: 6294
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
Hey Indy, yes do it but take your time sanding. For the bolt channels i used a dremel. It's a beautiful stem underneath that paint.
The cap is also carbon + ti. I think it has a kind of retro look to it in some ways.
Not the stiffest of stems, but then again my Superlogic C260 and EC90 SL are both much more beefy and heavy.
I think they should have made a larger diameter on this to make it stiffer.
The cap is also carbon + ti. I think it has a kind of retro look to it in some ways.
Not the stiffest of stems, but then again my Superlogic C260 and EC90 SL are both much more beefy and heavy.
I think they should have made a larger diameter on this to make it stiffer.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
- wheelsONfire
- Posts: 6294
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
Sanded Easton EC90 Aero, the part red bar in size 42. It's white underneath the red. You save a bit over 20 grams on this bar if you sand it.
Took a horrible amount of time though!
Stem and bar is (about) 310 grams (42+110).
Took a horrible amount of time though!
Stem and bar is (about) 310 grams (42+110).
Last edited by wheelsONfire on Thu Oct 15, 2015 6:20 am, edited 1 time in total.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓ Broad Selection ✓ Worldwide Delivery ✓
www.starbike.com
- wheelsONfire
- Posts: 6294
- Joined: Mon Jul 07, 2014 8:15 am
- Location: NorthEU
Hi Chris, PM for you.
Bikes:
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.
Ax Lightness Vial EVO Race (2019.01.03)
Open *UP* (2016.04.14)
Paduano Racing Fidia (kind of shelved)
Ex bike; Vial EVO D, Vial EVO Ultra, Scott Foil, Paduano ti bike.