Kalloy Uno Ultralight.

[P90Puma]

Anyone ever mounted an out-front Garmin mount on an Uno stem (Tillquist, Fetha etc)? If yes, could you confirm, what's the distance between the faceplate bolts - 24 or 25mm?

I am looking at this as well, so this mount http://edge-mount.bike/?product=mount-24 should work right, anyone got this installed?

Ditto, anyone do this? Just got the 120mm -17 and it came in at 119g with stock bolts.

[addictR1]

Just picked up my 4th Uno Kalloy stem. I love it! Picked up gold Ti screw using my eBay buck. Pretty light for a 90mm 17degree.




Sent from my iPhone using Tapatalk

[Wingnut]

I like the gold bolts!

[MichaelB]

Can anyone do me a huge favour ?

Can someone please measure the horizontal faceplate bolt spacing ? Need to compare it to an older 3T ARX stem to see if my current Garmin mount will still fit ?

Many thanks

[Krackor]

Already been answered in this thread

viewtopic.php?f=3&t=116669&p=1310253&hilit=24mm#p1310253

[MichaelB]

Much appreciated Krackor

EDIT : Measured the 3T stem, and it's 28mm , so that's scuppered that plan

[P90Puma]

Anyone ever mounted an out-front Garmin mount on an Uno stem (Tillquist, Fetha etc)? If yes, could you confirm, what's the distance between the faceplate bolts - 24 or 25mm?

I am looking at this as well, so this mount http://edge-mount.bike/?product=mount-24 should work right, anyone got this installed?

Echoing this, as can't seem to find a straight answer. Should work as the spacing is correct but haven't seen anyone run this?

[stevec1975]

Yep, the above mount works, as per the below on my bike

[P90Puma]

Yep, the above mount works, as per the below on my bike

Thanks!

[hanakuso1]

Just an update on my "faulty" bolts. The new stem and bolts are holding up well. No noticeable fatigue.

[siim]

Bought two Kalloy Unos. 90mm for the wife and 100mm for my in-progress R3 Disc.

Here's a video of removing the graphics with nail polish remover: https://www.instagram.com/p/BgPJbpDgGoT/

90mm on scale:


100mm:


Stock bolts:

[ggman]

Bought two Kalloy Unos. 90mm for the wife and 100mm for my in-progress R3 Disc.

Here's a video of removing the graphics with nail polish remover: https://www.instagram.com/p/BgPJbpDgGoT/

90mm on scale:


100mm:


Stock bolts:

Removed the decals off mine today also. Looks like I got a pretty good weight for 110mm!

[addictR1]

I had an old can of bumper paint striper.. so I just sprayed some on a q-tip and then wax on, wax off...


Sent from my iPhone using Tapatalk

[d36]

Can anyone sanity check something for me?

I think my 80mm stem is actually 85mm long

Anyone else noticed this?

[Klaster_1]

I think my 80mm stem is actually 85mm long

My 60mm is 65mm.