Page 1 of 3

Do latest wide profile wheels increase rolling resistance?

Posted: Sat Jan 19, 2013 5:09 pm
by dynaserve
Are some of the aero benefits from the latest wide profile wheels negated - Claims of improve grip / larger tire contact area must result in more rolling resistance?

Do latest wide profile wheels increase rolling resistance?

Posted: Sat Jan 19, 2013 5:09 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sat Jan 19, 2013 5:23 pm
by Zen Cyclery
I don't think there is much of a change in surface area when going from a standard to a wide rim (assuming you use the same tire/size). The wide rims simply allow the tire to sit in a less bulbous shape which will make cornering feel slightly more predictable and stable.

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sat Jan 19, 2013 6:01 pm
by djconnel
Less sidewall deformation from wider rims reduces, rather than increases, rolling resistance.

In theory wider tires should have less rolling resistance at the same tire pressure (to a limit) but typically increased sidewall deformation cancels that advantage. Going to wider rims restores it. The theoretical contact patch of least resistance is a circle.

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sat Jan 19, 2013 7:27 pm
by fdegrove
Hi,

Further to what djconnel says: you'll find the best narrow tyres to have the highest tpi count and a thin(-ish) thread. Up to 350 tpi using the best quality cotton or silk fiber tissue.

Studies have shown that on average a 23mm wide tyre is a better choice for road use since it exhibits the smallest set of compromises all factors considered.
To further optimise this you'd also need a rim that's a bit wider than the typical 19 to 21mm wide rim bed or else it would be an aerodynamic misfit.

The only tyres that can approach a circular shape contact area are latex track tyres. A decent road tyre will have an oval shape contact patch where ideally the edges are orientated lateraly across the tyre.
When the tyre is overinflated and/or has too low tpi count the edges of the oval shape will be found along the radius of the tyre.
This situation is unwanted as the thread (+ anti-puncture belt) of the tyre is much less flexible than the sidewalls hence increasing its rolling resistance.

Ciao, ;)

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sat Jan 19, 2013 10:14 pm
by NGMN
The only data I've seen shows wider rims being rolling resistance neutral. The main theory is that by widening the contact patch, the RR should go down.

I've never heard speculation or seen data showing a RR increase.

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sun Jan 20, 2013 4:00 am
by dynaserve
Improved side wall stiffness makes sense.

NGMN wrote:The main theory is that by widening the contact patch, the RR should go down.
Not so sure on that.

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sun Jan 20, 2013 4:25 am
by NGMN
Well, I'm not sure if you're saying you disagree with the hypothesis or with that being what manufacturers point at.

The general jist of things is explained by this graphic from Conti:
http://velonews.competitor.com/files/20 ... 46x421.jpg

Hed has claimed this as a benefit from about 2009 but as I said, the only data that I've seen is very neutral. Al Morrison showed that the same tire on a traditional 20mm and a 23mm rim, back to back on rollers, had the same resistance within margin of error.

And from an article by Greg Kopecky over at ST:
"Does that automatically mean that the Crr is lower? Some manufacturers suggest that this is the case, but nobody is producing hard numbers to prove it – or at least showing them to any of us. Zipp Technical Director, Josh Poertner, challenges the idea. He suggests that there may be a very, very small improvement – but neither their testing, nor any independent testing they’ve seen can prove it outside of the margin of error of the test (on the order of .0000125 Crr improvement). My suggestion is that saying that the wide rim itself improves Crr, is like claiming that the chicken came first, when it’s really the egg. Yes, a wide rim allows you to run a wider tire and lower pressure – which lead to lower Crr. But it isn’t the rim itself that lends to this improvement; or at least not enough that we can actually measure it. I’ll go ahead and insert the voice of reason for you: Go worry about something else! Sleep more! Eat less Twinkies!"

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sun Jan 20, 2013 5:01 am
by teufelhunden222
Now what would make sense to me is that a wider and shorter contact patch will have less scrub loss when turning in a corner.(without getting extreme)It could also be said like "The closer one gets to a circular contact patch shape the less friction in the corner) As far as running in a straight line it won't make a hill of beans IMO

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sun Jan 20, 2013 9:46 pm
by shapeofthings
according to this laboratory, wider is better/faster:

http://www.bikeradar.com/gear/article/bicycle-tires-puncturing-the-myths-29245/

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Sun Jan 20, 2013 10:29 pm
by WMW
Good page from Flo... but I thought I saw one where they measured the actual difference in contact patch shape and it was very small. And if you reduce the pressure like they always tell you to with a wide rim, you can kiss that Crr benefit goodbye and then some.

http://flocycling.blogspot.com/2011/08/ ... 4-flo.html

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Mon Jan 21, 2013 9:54 am
by DMF
WMW, how do you figure? Aren'r we thought that the lower pressure is what gives us the lower crr? Not the wider rim in itself, as that really only gives än aero benefit?

Lower pressure - lower crr? To a certain point ofcourse...

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Mon Jan 21, 2013 5:54 pm
by kmak
Easy way to find an answer - what are the pros riding?

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Mon Jan 21, 2013 5:59 pm
by Kasparz
kmak wrote:Easy way to find an answer - what are the pros riding?

Whatever sponsor pays them to ride

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Mon Jan 21, 2013 7:10 pm
by WMW
DMF wrote:Lower pressure - lower crr? To a certain point of course...


Where is that point? Tom Anhalt did some measurements and found that point at ~120 psi... but it wasn't a really accurate test and would be specific to his tires and road.

On a smooth surface higher pressure always *reduces* Crr. But there is an optimal point on roads where the combination of resistance due to roughness and the resistance due to tire flex is minimized.

Plus, wide rims make the sidewalls more vertical, which inherently makes the ride more harsh. I believe that is why manufacturers tell you to reduce pressure. If your narrow rims feel right with 100 psi, and your wide ones feel right with 90 psi, I'm pretty sure you'll have higher resistance with the wide ones.

Re: Do latest wide profile wheels increase rolling resistanc

Posted: Mon Jan 21, 2013 7:10 pm
by Weenie

Visit starbike.com Online Retailer for HighEnd cycling components
Great Prices ✓    Broad Selection ✓    Worldwide Delivery ✓

www.starbike.com



Re: Do latest wide profile wheels increase rolling resistanc

Posted: Mon Jan 21, 2013 7:29 pm
by DMF
All magazine tests I've seen in recent years put that number way closer to the 75-80psi range (23mm clincher) for a mid-weight rider (65-70kg) most likely lower than most of us are willing to go in fear of puncture and some very scary cornering, at least on 19mm rims.

120psi may rule on track, but on asphalt it's just insane unless you're a real lardo... Rolling resistance has very little to do with road friction, it's all in the movement of the casing. The more supple the lower the crr. No tire is supple at 120psi.