Does anyone know who makes this jig?

[avispa]

Does anyone know who makes the cleat adjustemnt jog the Trek Team is using?
https://www.cyclingnews.com/features/to ... h-gallery/
It's picture #8 on that article. It's not BiciSupport.

Thanks!

[spdntrxi]

your link is pretty old since it's 2024 now... sorry cant help ya.

[avispa]

your link is pretty old since it's 2024 now... sorry cant help ya.

Ahh Cycling News!!! The origination article was from today, however!
https://www.cyclingnews.com/news/leaked ... ar-online/

In any case, wether the link send us to a 2020 article is a bit irrelevant if one has the knowledge. Is not that it was a picture from 1936.

[kode54]

I e seen some on aliexpress. Not sure if this is what you’re looking for…

https://www.aliexpress.com/item/3256805769799461.html

[Nomadmax]

The pic of Mads in World Champion colors was a giveaway By this time, that cleat adjustment device is a smart phone and companion device no bigger than a pack of cigs. And it costs four times as much

[MichaelK]

The case says "Unior" on it. Might be custom from them or perhaps fully custom made by Trek themselves.

[uraqt]

The links are not working for me, however if it's the same as the one as Kode54 posted. then it's Ergon

C

[ms6073]

The links are not working for me, however if it's the same as the one as Kode54 posted. then it's Ergon

It is definitely not Ergon.

[uraqt]

YEP. : )

https://www.bikeradar.com/features/pro- ... our-tech-2

it's custom for sure : )

C

[BdaGhisallo]

This BiciSupport jig will basically do the same thing. You won't have the physical hard stops the custom jig pictured has but the grid on the plexiglass will certainly do the job. I've had one for years and it works a treat.

http://www.bicisupport.it/index.cfm/CLE ... oli&id=389

You will need to have pedals that have wrench flats, though. There is not enough room to get a hex key in the middle in order to get both pedals mounted if they only have recessed hex sockets in the axles.

[jurez]

The case says "Unior" on it. Might be custom from them or perhaps fully custom made by Trek themselves.

Unior is a slovenian company that makes tools. They started making quite a lot of cycling specific tools. No idea of the quality of their cycling tools but the rest of their tool lineup they are known for being of good quality.

No idea if that jig is from them, just wanted to give more infos about unior.

also link: https://uniortools.com/slo/category/940333

[ND4SPD]

The case says "Unior" on it. Might be custom from them or perhaps fully custom made by Trek themselves.

Unior is a slovenian company that makes tools. They started making quite a lot of cycling specific tools. No idea of the quality of their cycling tools but the rest of their tool lineup they are known for being of good quality.

It's just a case, Unior makes good tools, but they don't make cleat jigs.

it's custom for sure

I also think it's custom. But there are options on the market, Ergon, Neatcleats Align+, Selle Italia idmatch Cleat Fit:

https://www.ergonbike.com/en/product?a= ... ing&w=road

https://neatcleats.cc/products/neatcleats-align-1

https://www.idmatch.cc/en/products/foot ... /cleat-fit