Who are you (no off-topic talk please)
Moderators: MrCurrieinahurry, maxim809, Moderator Team
-
1spd
- Posts: 175
- Joined: Fri Jun 15, 2012 2:27 pm
- Location: Gaithersburg, Maryland
by 1spd on Thu Dec 13, 2012 6:01 pm
OMG that is a huge frame! Love the XCR. The guy I bought my Pinella from (owns his own shop) finished building his wifes bike. Custom XCR drilled for Campy electric. Bike has full SR on it and it is tiny (she is like 5'4") so the bike weighs in at low 16's or so. Beautiful bike/frame for sure.
Cannondale Synapse (alu)...it works
-
1spd
- Posts: 175
- Joined: Fri Jun 15, 2012 2:27 pm
- Location: Gaithersburg, Maryland
by 1spd on Thu Dec 13, 2012 8:14 pm
So I am now thinking that my future goal for the build is going to be 7000g or 15.4 lbs. It will take a little while mind you and some strategic planning but I think it can be done without having to build another set of wheels or buy an uber expensive crankset. We'll see.
Cannondale Synapse (alu)...it works
-
merl
- Posts: 6
- Joined: Mon May 21, 2012 5:57 am
-
Cheers!
- Posts: 1483
- Joined: Sat Aug 05, 2006 2:29 am
- Location: Mountain View, California
-
Contact:
by Cheers! on Sat Dec 15, 2012 6:27 pm
BmanX wrote:6040g in the picture. If I went with his more simplistic frame it would have been lighter and sub 6000g easily. Rob is a master with steel.
that is a nice bike!
-
Mclennan
- Shop Owner / Manufacturer
- Posts: 12
- Joined: Mon Oct 15, 2012 9:17 pm
- Location: Daylesford Australia
-
Contact:
-
Mclennan
- Shop Owner / Manufacturer
- Posts: 12
- Joined: Mon Oct 15, 2012 9:17 pm
- Location: Daylesford Australia
-
Contact:
by Mclennan on Sun Dec 30, 2012 2:02 am
Cheers! wrote:mmmmMMMmmm. Kva stainless.
Are the lugs made from stainless too?
Hi there, the lugs are all from Darryl Llewellyn here in Australia. We used the non stainless lugs on the frame on this one but are available in stainless with the exception of the bb shell. Next bike is going to be all stainless lugs. All dropouts and the fork crown are stainless on this one.
Cheers
Keir